Vehicle & Technical > Range Rover

Towing a sankey trailer with a P38

<< < (3/3)

Moneypit:
There is a type approved hitch available from Sparex 10642. This will tow a Sankey.

Range Rover Ron:
Thanks moneypit, I'll check it out.

Range Rover Ron:
Hi Moneypit, I've had a look at Sparex and I think you may mean the dual use ball and locking hitch, the hitch is not the problem it is the height of the hitch, I can use a similar hitch, a NATO hitch, a pin and ball or a normal 50mm ball type hitch. The real problem is then the height of the coupling with the Sankey sitting at almost 45 degrees and not looking right. I need to lift the height of the Sankey/NATO hitch to have the trailer more in line with the P38, I know you do need a bit of noseweight so I'm not looking for level but need a way to get the unit sitting right and looking safe. If I raise the hitch it will also give me problems with the tailgate dropping onto the riased hitch so making a tube type coupling to the correct height seems to be the way to go. Cheers,
Ron.

Navigation

[0] Message Index

[*] Previous page