Vehicle & Technical > Defender

disco 200tdi conversion

(1/3) > >>

william127:
ive now got a 200tdi disco engine for my defender and have a couple of questions:
what engine mounts do i need- defender or disco?
what airbox do i need- defender or disco, if its defender is there a diference between 2.5td, 200 and 300tdi or will any of them fit?

im sure these questions have been asked on here many times before, but thanks in advance for any answers, William

Disco 90 george:
Use the defender engine mounts
airbox is up to you, I used the 2.5td and it fits right inside the wing but what ever you can get.
Go to someone like RGB and pick bits you want

bogie:
Use an k&n ,big difference!

william127:
rgb, take its a breakers? where abouts is it?
 might get a k and n, got 1 in in my td5

thanks for the quick replies, William

craig_midz:
as said use defender engine mounts but they bolt onto engine using other set of holes not same as disco mounts u will need to get oil cooler pipes extended power steerin pipes extended if usin disco ones an u will have to lower rad mounts on front of ya chassis an easiest way to get round exhaust mod is to change turbo 2 a 300 one an use standard downpipe then an u will get a bit more power too an then it will be just a case of makin intercooler pipes up if it had a td in it first use td oil cooler pipes an all fuel lines will screw in2 disco fuel filter housin

Navigation

[0] Message Index

[#] Next page