Vehicle & Technical > Defender

A couple of questions..

<< < (2/3) > >>

Mark_Solesbury:
Does anyone have alink to such a oil catching device?

thats the next job to do on my 90.. im sick of the turbo and intercooler getting oil in it!

I have to clean it out about once a year, but id rather not have to!

BigA:
there are a few on eblag http://cgi.ebay.co.uk/Polished-Oil-Catch-Tank-106-107-206-207-306-307-205-GTi_W0QQitemZ250403355743QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item250403355743&_trksid=p3286.c0.m14&_trkparms=72%3A1689%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318 as an example?

think i have seen postings about them on here in the past, please dont take my word for them being any good  :?

Some very nice looking on eblag, just searched for oil catcher, would look nice in the engine bay, until they were mud brown like the rest  :lol:

V8MoneyPit:

--- Quote from: Monkeymantulp on April 16, 2009, 19:06:39 ---My 2.5td ( :roll: ) oil cap breather hose is lose in the engine bay and hangs under the vehicle, is this suppose to be attached to the air box hole which has been blanked up?
--- End quote ---

There should be a hose from the back of the block up to the cap. Then another from the cap to the filter housing. I assume the one from the block is attatched? If not, you'll be getting plenty of crud into the engine!

trickydicky:
there is only one hose going to the cap on the later 19j engines

Monkeymantulp:
as trickydicky says, i only have 1 pipe from the filler cap..

Navigation

[0] Message Index

[#] Next page

[*] Previous page