Vehicle & Technical > Defender

disco 200tdi in a td 90

<< < (2/3) > >>

Les Henson:
You don't need to swap flywheels. If you want to just bolt the gearbox straight on, then either alter the 200TDi flywheel housing, or put the TD one on the new engine (it's a straight swap). There is still one stud that has to be removed though.


Les.

300TDi Disco:
Don't you require a different down pipe because of where the turbo sits???????

bogie:
I BOUGHT A 2nd HAND DISCO EXHAUST FROM CRADDOCKS 4 A TENNER AND 1 HOUR LATER I HAD A DOWN PIPE. I BOUGHT A STEVE PARKER DOWN PIPE 4 MY OTHER MOTOR B4 . IVE BEEN KICKING MY SELF EVER SINCE BECAUSE AT £136 DELIVERED TOTAL RIP OFF!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

denviks:
have a look here

http://www.plcuk.co.uk/showthread.php?t=16597

just done the same conversion. it was well worth all the effort  :cool: :cool: :cool:

billy badger:
I did this conversion last year & performance is greatly improved. Used exhaust & intercooler pipe kit from parkers which were expensive at the time, but prices in their recent ads seem to be quite a bit cheaper. They do make a very tidy job when finished though.

Navigation

[0] Message Index

[#] Next page

[*] Previous page