Vehicle & Technical > Discovery
Hi Lift Jack
Disco Matt:
--- Quote from: Skibum346 on June 26, 2008, 08:46:24 ---I have a detachable towbar fitted which I usually leave off unless I need it. The square section hole for bolted to the chassis is a good high lift point on the back... assuming you have the defender extension on the high lift.
Skibum
--- End quote ---
I was just about to ask if there's anything to enable you to jack on a detachable towbar mounting - mine has the square receiver hitch hole.
Skibum346:
--- Quote from: Disco Matt on June 26, 2008, 10:08:26 ---
--- Quote from: Skibum346 on June 26, 2008, 08:46:24 ---I have a detachable towbar fitted which I usually leave off unless I need it. The square section hole for bolted to the chassis is a good high lift point on the back... assuming you have the defender extension on the high lift.
Skibum
--- End quote ---
I was just about to ask if there's anything to enable you to jack on a detachable towbar mounting - mine has the square receiver hitch hole.
--- End quote ---
This is the 90/110 Jack adaptor that most rock sliders/HD Bumpers are set up for these days.
The tube of the adaptor is a very loose fit in mine but there is enough of it inside to prevent things getting too hairy. Just make sure you put a bolt or pin with a locking mechanism through the adaptor and foot of the jack! :shock:
Skibum
Navigation
[0] Message Index
[*] Previous page
Go to full version