AuthorTopic: disco redesign  (Read 47235 times)

0 Members and 1 Guest are viewing this topic.

mentalmoshio sophs V8i

  • Guest
Re: disco revamp project
« Reply #180 on: September 24, 2008, 20:00:21 »
job one change brakes , that was the plan anyway. :( turns out now  :-o

its gotta have 2  recon rear brake calipers  pistons on disc on both and seized on  a good .also  new mintex brake pads all around to be fitted.

did do quite alot of waxoyling underneath and engine bay today  :afro:

mentalmoshio sophs V8i

  • Guest
Re: disco revamp project
« Reply #181 on: September 24, 2008, 21:44:26 »
how birght are your lights mate,

have you been stoped for it,carnt be legal can it :huh:

take a look there twice as bright as theis damm  the camera flash light

mentalmoshio sophs V8i

  • Guest
Re: disco revamp project
« Reply #182 on: September 27, 2008, 14:31:30 »
now bedded in have a listen

http://uk.youtube.com/watch?v=-B0VIEf6VmY


at what rpm is mot noise levels tested ?
« Last Edit: September 27, 2008, 14:33:05 by david p »

mentalmoshio sophs V8i

  • Guest
Re: disco revamp project
« Reply #183 on: September 27, 2008, 19:27:45 »
ive change the storage around abit , had enough of it smacking my head every time i got in there .  :lol: :lol: :lol:

waxoyl has come up atreat

Offline auf_wiedersehen_pet

  • Posts: 1179
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: disco revamp project
« Reply #184 on: September 27, 2008, 19:40:22 »
now bedded in have a listen

http://uk.youtube.com/watch?v=-B0VIEf6VmY


at what rpm is mot noise levels tested ?

As meaty as a Butcher's window!

 :clap: :clap: :clap:
Rob Steele

1995 Land Rover Discovery 300 TDi - Everyday Car (Ex Jap)
2007 Toyota Avensis 2.2 T-180 - Sensible Car (Ex TSB Bank)

Dr Evil

  • Guest
Re: disco revamp project
« Reply #185 on: September 28, 2008, 17:41:54 »
Burble, burble, burble, burble, burble, burble, burble, burble, burble, 4" of water, splash, splash, burble, burble, cough, cough, splutter, splutter, die, winch, winch, wait 2 hours, burble, burble.  ;) :D

Offline Disco-Ron

  • Posts: 1048
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: disco revamp project
« Reply #186 on: September 28, 2008, 17:44:26 »
I've never had noise level checked at an mot..... it's all down to the testers ear if they even think of it..... i suspect it'd have to be 'silly loud' for you to have any issues.....
gone from 200tdi.... to 300tdi... still with loads done to it, in fact, even more than the last truck...LOL!!!

mentalmoshio sophs V8i

  • Guest
Re: disco revamp project
« Reply #187 on: October 01, 2008, 22:36:13 »
front brakes done , rear calipers on and pads in just gotta run new brake line on the back axle at the weekend

mentalmoshio sophs V8i

  • Guest
Re: mental disco project
« Reply #188 on: October 01, 2008, 22:48:19 »
steering wheel is finally on  :D :D :D :D and cold air pipe in place

ben_haynes

  • Guest
Re: mental disco project
« Reply #189 on: October 01, 2008, 23:03:45 »
that is an AIR FILTER you div, a cold air pipe is a piece of pipe that allows cold air in

Offline boss

  • Posts: 1634
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +2/-0
  • "steerings a little loose!"
  • Referrals: 0
Re: mental disco project
« Reply #190 on: October 01, 2008, 23:11:04 »
sorry steve but dont see how is this mental...and in my books its not really a project.

"the young disco chopping maniac" -disco_stu!
www.artoffroad.com

bossFAB - stickers avalable

mentalmoshio sophs V8i

  • Guest
Re: mental disco project
« Reply #191 on: October 01, 2008, 23:16:51 »
would u think all my ideas are sane than boss. just know  locally as u still got that mental truck thats all. big disco 35s plus are extreme one in my eyes

ben_haynes

  • Guest
Re: mental disco project
« Reply #192 on: October 01, 2008, 23:17:10 »
sorry steve but dont see how is this mental...and in my books its not really a project.

its mental because its not a corsa with all these mods on it

mentalmoshio sophs V8i

  • Guest
Re: mental disco project
« Reply #193 on: October 01, 2008, 23:20:34 »
 :lol: but a mini with rover v8s are wacky

Offline Chris Putt

  • Posts: 366
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: disco redesign
« Reply #194 on: October 02, 2008, 01:42:47 »
So the point of the snorkel is what on this truck?
'Its Gripped'
'Its sorted!'
'Lets Offroad!'

mentalmoshio sophs V8i

  • Guest
Re: disco redesign
« Reply #195 on: October 02, 2008, 01:59:49 »
find a v8  air box  :lol: to seal it all up

Offline mobi

  • Posts: 291
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: disco revamp project
« Reply #196 on: October 02, 2008, 07:17:07 »
how birght are your lights mate,

have you been stoped for it,carnt be legal can it :huh:

take a look there twice as bright as theis damm  the camera flash light

it all good saying that your back lights are bright enough, BUT YOU PAINTED OVER YOUR REFLECTERS, they're not on there for looks. :lol: :lol: and a mot fail.
and did you waxoyl your hub? it looks like it! if you did there is a chance the wheel will move then the wheel nuts may come loose and the wheel will come off, that might be a good thing [-X just don't take a innocent family when it does.

Offline GreedyGibson

  • Posts: 101
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: disco redesign
« Reply #197 on: October 02, 2008, 09:15:12 »
find a v8  air box  :lol: to seal it all up

Then the point of the K&N will be ?

L reg Discovery 200Tdi
2" Lift Procomp shocks Golddigger rear dislocation cones
Extended brake hoses
Rebel 4x4 Steering guard and Diff Guard
1st Four Winch Bumper with Tmax EW9500 Winch and cast fairlead
Dual batteries with X eng split charge system
Safari Snorkel
31.10/50 x 15 Broco Grizzly Claws On silver Modulars
Homemade Rocksliders (ta Boss)

Offline stuntman

  • Posts: 693
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: disco redesign
« Reply #198 on: October 02, 2008, 12:06:59 »
First puddle will clog that or any mud will destroy that. Mate I'm pretty laid back but seriously dude, this is begining to look like a bad advertisment for halfrauds.

You have a lot of enthusiasm and you can weld, why not do more fabrication instead of bolt ons?

No disrespect is meant, it's just getting a little 'silly'
1989 3.5slti Mazda powered 110DC

Erm ... I've lost my keys darling ... again!

Offline Chris Putt

  • Posts: 366
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: disco redesign
« Reply #199 on: October 02, 2008, 15:11:37 »
First puddle will clog that or any mud will destroy that. Mate I'm pretty laid back but seriously dude, this is begining to look like a bad advertisment for halfrauds.

You have a lot of enthusiasm and you can weld, why not do more fabrication instead of bolt ons?

No disrespect is meant, it's just getting a little 'silly'

Seconded, either do landrover, or do rudeboi, don't try and do both.
'Its Gripped'
'Its sorted!'
'Lets Offroad!'

Offline boss

  • Posts: 1634
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +2/-0
  • "steerings a little loose!"
  • Referrals: 0
Re: disco redesign
« Reply #200 on: October 02, 2008, 18:21:05 »
in the defence of it all. a snorkel is a valid investment on a V8, dizzy cap gets splashed, big deal 5 mins with a cloth. water sucked through the air intake bye bye engine.

"the young disco chopping maniac" -disco_stu!
www.artoffroad.com

bossFAB - stickers avalable

Offline GreedyGibson

  • Posts: 101
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: disco redesign
« Reply #201 on: October 02, 2008, 18:31:55 »
Snorkels are a very good investment but if you put a k&n air filter on they are uselless, If you then put the k&n filter in a sealed box the k&n is pointless.

L reg Discovery 200Tdi
2" Lift Procomp shocks Golddigger rear dislocation cones
Extended brake hoses
Rebel 4x4 Steering guard and Diff Guard
1st Four Winch Bumper with Tmax EW9500 Winch and cast fairlead
Dual batteries with X eng split charge system
Safari Snorkel
31.10/50 x 15 Broco Grizzly Claws On silver Modulars
Homemade Rocksliders (ta Boss)

Offline crazymac

  • Posts: 1891
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: disco redesign
« Reply #202 on: October 02, 2008, 18:43:07 »
Exactly, how do you connect up a snorkel to a K&N??

If you have the proper air box with the K&N to fit that then fine, but with what Steve has fitted it makes no sense to fit a snorkel!
I HAVE THE BODY OF A GOD

shame its Budda!!

Offline DoubleTop

  • Posts: 150
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: disco redesign
« Reply #203 on: October 02, 2008, 19:28:34 »
there was at least one Disco at Abingdon with a snorkel fitted with a k&n filter, when I say snorkel I mean drainpipe as that was the construction of the persons air intake :)  Made a right noise in my eye it being about head height from where I was at the time.

DT.
Currently playing Space Pioneers
on transfer from bootcamp, if this link is used my account is credited with 25 premium points

Offline boss

  • Posts: 1634
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +2/-0
  • "steerings a little loose!"
  • Referrals: 0
Re: disco redesign
« Reply #204 on: October 02, 2008, 20:08:36 »
im confused now. what has he done?

"the young disco chopping maniac" -disco_stu!
www.artoffroad.com

bossFAB - stickers avalable

mentalmoshio sophs V8i

  • Guest
Re: disco redesign
« Reply #205 on: October 02, 2008, 20:11:37 »
im confused now. what has he done?


 :doh: damm boss i was lost aswell i was hoping u had the tecky answers

mentalmoshio sophs V8i

  • Guest
Re: disco redesign
« Reply #206 on: October 02, 2008, 20:16:05 »
First puddle will clog that or any mud will destroy that. Mate I'm pretty laid back but seriously dude, this is begining to look like a bad advertisment for halfrauds.

You have a lot of enthusiasm and you can weld, why not do more fabrication instead of bolt ons?

No disrespect is meant, it's just getting a little 'silly'

so that will be the rear winch mount and drop towbar  in the shed ive been making on and off along with the fuel tank guard

may keep the rear winch mount off till ive done a 60mm body lift next year hopefully
« Last Edit: October 02, 2008, 20:27:30 by david p »

mentalmoshio sophs V8i

  • Guest
Re: disco revamp project
« Reply #207 on: October 02, 2008, 20:24:37 »
front brakes done , rear calipers on and pads in just gotta run new brake line on the back axle at the weekend

ah the gloss black centre hubs  :x damm im toying with the idea of mach 5 wheels or wolfrace with big brakes and seal covered red caliper, 40mm wheel spacers

running 285s road tyres

but the damm bank manger wont open a joint account with me  :evil: :evil: what a ....... ( jethro pun ) :lol: :lol:

Offline crazymac

  • Posts: 1891
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: disco redesign
« Reply #208 on: October 02, 2008, 20:47:43 »
im confused now. what has he done?

steering wheel is finally on  :D :D :D :D and cold air pipe in place

If you look at this, he has no airbox and just a K&N filter fitted. The question is how does he plan of fitting a snorkel to this? As you know a snorkel needs to be sealed to protect the engine! without the airbox and the snorkel connected to it and sealed its useless!
I HAVE THE BODY OF A GOD

shame its Budda!!

mentalmoshio sophs V8i

  • Guest
Re: disco redesign
« Reply #209 on: October 02, 2008, 20:48:52 »
thx to jake on all his imput on rear winch mounts towbar , not forgetting boss on threads too :D

i think the mount i ve will fit like turbonutters one

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal