Vehicle & Technical > Discovery

Lift Kits

(1/4) > >>

stuntman:
Hello one and all, merry christmas/ xmas (whichever your belief)

I know this has been asked before again and again.

But can anyone help. I want to lift my truck +2", and spacer it 40mm.

I have the spacers and the 10 bolts, along with new body mounts.

What I need is a supplier of the suspension kit.

I know I need +2 springs and shocks, Do I need dislocation cones ( I only realy green lane at the minute), What else do I need.

Sorry for bringing this all up again but I am a newbie  :twisted:

I have cash waiting but I want to get the best deal I can, so can anyone tell me where to get the best deal from, I also want +5 brake lines. ( the standard ones are too short to start off with!)

Thanks everyone in advance

Andi K

Jake:
When it comes to suspension, fit the best and dont waste your money on cheap nasty kit.
Go for Old Man Emu, nothing else comes close.
A kit, personallised for your truck is about £545
Extended brake lines is the only other thing you *should* buy
Relocation cones (£35) arn't essential but very handy for preventing your rear springs from un-seating
 8)

extreme90:
as jake said
dont fit rubbish as you have to replace them twice as quick as you would do with the real deal
people run OME on here and they have been fitted 5+ years and still not sagged
im going old man emu when the axles are put back under my comp 90 as aim sick of chaning spings every year  :roll:  :roll:
( should have got OME in the 1st place )
and why +5 lines, cripes, im only on +4s and my spring when fully dislocated sits 10mm above the bottom of me extended bump stops  :shock:
dan

stuntman:
Hello Jake, that's more than I was after paying, I know you get what you pay for.

I've always been one for buying the best I can afford. However this vehicle is not going to be lavished with cash, I have between 200-300 to spend.

Hello Dan, I was planning +5 was everyone seems to think the standard ones are too short, and as I was planning +2 on the suspension and 40mm on the body, I'd get a little lee way.

extreme90:
only the rear you would need longer
but most just extend the bracket down

dont forget its only suspention lift that need the extended hoses for the front
the flexy ones as the go from chassis bracket to axle
not body to axle
dan

Navigation

[0] Message Index

[#] Next page