will these fit..........

[spinkster]

as a straight swop for the hubs on my 1988 110 with drum brakes?

http://cgi.ebay.co.uk/landrover-complete-rear-hubs-with-disks-calipers-pads_W0QQitemZ130152354635QQihZ003QQcategoryZ31348QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[martha focker]

i would say so but see what the rest say first :D

[Xtremeteam]

aslong as they come with the caliper mounting brackets

you may need different 1/2 shafts but in not 100% sure

[L90OOK]

You may have to get different stub axles as there are a few variants.
if they are the earlier type you should be ok.
May also have to change drive shaft but they are cheap enough.

[Guardian.]

could just change the whole axle for disc type, they dont make much more than that usually on ebay.

[muck_truck]

most ptobably wont fit as yor axle tube wont have the calliper mounts.

i bought a disco rear axle and was going to keep my 90 axle tube but the mounts for the calliper are cast on the axle tube.

Wont you have a sailsbury rear axle ?  wouldnt the hubs be different to rover ones

[iomlr]

most ptobably wont fit as yor axle tube wont have the calliper mounts.

i bought a disco rear axle and was going to keep my 90 axle tube but the mounts for the calliper are cast on the axle tube.

Wont you have a sailsbury rear axle ?  wouldnt the hubs be different to rover ones

correct wont fit! need a rrc or a disco or a landrover rear axel that has had discs before!

[spinkster]

ah i wont bother bidding then.........i was just browsing and they looked cheap enough if they'd fit..................so what exactly do i need to change my salisbury to disc braked?

[Xtremeteam]

most ptobably wont fit as yor axle tube wont have the calliper mounts.

i bought a disco rear axle and was going to keep my 90 axle tube but the mounts for the calliper are cast on the axle tube.

Wont you have a sailsbury rear axle ?  wouldnt the hubs be different to rover ones

correct wont fit! need a rrc or a disco or a landrover rear axel that has had discs before!

incorrect

the caliper mounts bolt onto the mounting ring that the stub axle bolts onto

BTDT converted my dads truck to discs

[muck_truck]

incorrect

the caliper mounts bolt onto the mounting ring that the stub axle bolts onto

BTDT converted my dads truck to discs

are you talking about sailsbury or rover axle?  cause im prety sure that the the caliper mounts where part of the tube cast on the disco (rover) axle i bought.

Sailbury has a bolt on mount for a caliper.

[Xtremeteam]

your talking about a standard axle,
im talking about a salsbury which will be fitted to his 110,

on a 110 its all bolt on bits