Chat & Social > The Bar - General Chat
winch security
shaun and co:
if you go down to your local nut and bolt shop they should be able to sell you shear nuts. when you tighten them up the hex head shears off just leaving a conical collar. Again its a case of chiseling them off if you want to remove them though. when i fitted mine i just replaced the winch bolts and the bumper bolts with ones an inch longer, tightened them up as normal and then welded the end 10mm of the bolts so if i need to get them off i can cut 10mm away from the bottom of the bumper/ chassis leg and dont damage anything. means little scrote can loosen the winch or bumper but cant nick it! also bought a stoplock as anything with a winch bumper on it is a prime target for ram raider scrote.
tonka toy:
OEC 4x4 do a product called nogo enclosures,with these you stick the bolt through the hole bolt it back in and whack a cover over the nut.
to get them off you have to angle grind them off, a pain but you can also stick some on your bumper to stop them taking that as well.
about £10 - £15 for five.
they will be at billing or go to their web page and look under security fasteners.
hope this helps
neil
rollazuki:
You need one of these stickers:
lee celtic:
pass the hook off your winch through your letter box and hook it round your leg :wink:
There are cups you pass the bolt through then when they are tight you wack a plug into the end giving nothing to grip onto when you want them off you hold the cup with mole grips and drill out the plug . 8)
lee celtic:
Just had a thought go to your local engineers and get the right size bolts in a left hand thread the average thief will be there all night making sure the things are tight for you ...:lol: :lol:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version