Vehicle & Technical > Range Rover
clunk? rrc 1989 3.9
Garth:
Check all bushes in that area including shocks.
They may look OK but get in with a good prybar and give a good yank. Try with wheels on ground and also on axle stands.
Also look for red rust coming from bolts and around outside of bushes (a good sign that something is loose).
Also check for any movement (up-down, side to side) on the wheel when jacked up.
Range Rover Blues:
I had a radius arm to axle bolt that was seized in the bush but not tight, used to drive me insane, so I fixed it one day with LR special tool #2
hairyasswelder:
--- Quote from: "Range Rover Blues" --- so I fixed it one day with LR special tool #2
--- End quote ---
Is #2 the hammer or the gas axe?? :lol:
Range Rover Blues:
--- Quote from: "hairyasswelder" ---
--- Quote from: "Range Rover Blues" --- so I fixed it one day with LR special tool #2
--- End quote ---
Is #2 the hammer or the gas axe?? :lol:
--- End quote ---
Electric gas-axe, I like my tools to have a plug on them :wink:
jpc:
im going to get someone to look at it it is the same clunk but i just cant see/feel anything when stationary but when its moving it clunks quite a lot.
thanks to you all for the help..
ill keep you posted.
jon
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version