Vehicle & Technical > Range Rover

clunk? rrc 1989 3.9

(1/7) > >>

jpc:
helllllpppp!!!

i had a small clunk coming from the drivers side wheel/chassis area
i thought that it was the springs as they looked worn and rusty they were also
coiled up at the top,so today i replaced both front springs (a first for me)and guess what it still clunks but worse it clunks on acceleration ,when you break,when you turn the steering wheel and when you go over a bump
i had a look at the rubber bushes they seem ok....im now at a loss
please help any info would greatfully recived..

jon :D

Rich_P:
Does it clunk when you turn the wheel while stationary?  If not, then I'd say it's probably a propshaft UJ that is due for replacement.

jpc:
no it only seems to clunk whilst moving.
is uj likely to be expensive/hard to replace?
is there a way to check?

cheers jon

mark.yellow.series.3:
un bolt one end and see how much play is in them, but a new UJ is about £8.

jpc:
thanks ill have a look tomorrow! :D

Navigation

[0] Message Index

[#] Next page