Vehicle & Technical > Range Rover
clunk? rrc 1989 3.9
buster uk:
I have the exact same clunk from the drivers side front wheel area and it drives me mad !!!!
Its polly bushed complete.Has complete 2" lift springs and dampers.
New wheel bearings,and i disconnected the front prop to see if it went away and it didnt.I have double checked the endfloat on the front disks again and still cant trace it.
It clunks as though something is moving to one position to another but it doesnt do it that often,i thought it could be the radius arm not fully tightened but that looks ok.The springs and dampers have been on about a year now.Im baffled , so any more ideas on what to check please.
cheers
andy
jpc:
well maybe we could call ourselves the clunkers :D
my clunk feels like it goes through you? (if you know what i mean?)
its front drivers side i pressure washed the underside of the car but all looked ok? im going to change the shocks and uj joint this weekend ill keep you posted..
jon-paul
Garth:
Dont change anything till you are sure thats the problem and its going to cause you a problem.
I have clunks from o\s front, o\s rear, n\s front, transmission, a wine from the rear diff, noises from front calipers, rear brakes squeal like a pig, tappets rattle on start up, one of the fan belts squeals, revs to 2500 on start up, tailgate doesn,t lock, heater matrix is bust, radio doesnt work, there is fist sized hole in the floor taped up with tank tape.
BUT I use daily without any problems and I work through the ever expanding list in priority order (its getting cold so I need to fix heater)
jpc:
thanks for the advice garth :D
i just want to make sure we are safe when driving!
cheers jon
TEMPL4R:
If you can't find anything outside the axle and it sounds worse when you are turning, it's most probably the CV joint.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version