Vehicle & Technical > Discovery

wheel lean

<< < (3/6) > >>

tjsj:
and one more

tjsj:
Anyone have any idea what the problem is?? (if there is one) and is it worth putting a smaller wheel and tyre combination on it as got some 235/70/r16 on rims and I could put one of them on it.

Damonski:
With the 3" lift has it got the new prop and radius arms ?

tjsj:
I have no idea to be honest as we only picked it up last night ill go and take some more photos if you want.

Henry Webster:
a.jpeg is the only useful photo here - as you will not spot the bend in any way other than comparing the two wheels from the front.

It might be useful having a photo from a slightly lower angle, but it looks like the axle is a little bent.  Have you checked the swivel pins yet?  You could probably even do it with the vehicle on the ground if it has 'that' much play in it.  Just shake the wheel from the top and detect any play.

I suspect the axle is a bit bent.  This is not necessarily a problem now, but over time and with more heavy use it will only get worse.

Navigation

[0] Message Index

[#] Next page

[*] Previous page