Vehicle & Technical > Discovery

cv joint help.

<< < (3/4) > >>

Wanderer:
Sorry to be a pedant Mikee but unless you can tell by the VIN then you you can't tell what type is on without stripping down.
You can tell which ones the rears are but the fronts are a different matter. I can't say off the top of my head but there's a mish mash of shafts between the diff itself and the CV. That's where the problems lie. The inboard of the CV joint.

You're looking at the splines on the shaft between the diff and CV joint.

muddyweb:

--- Quote from: "Wanderer" ---Sorry to be a pedant Mikee but unless you can tell by the VIN then you you can't tell what type is on without stripping down.
--- End quote ---


Just to be a bit more pedantic... the VIN isn't enough.  You need the VIN and the axle number to be certain.. and from that, you can get it sorted.

If you don't fancy stripping it down... PM me your VIN number and the axle number (stamped on the casing just to the right of the diff housing when viewed from the front usually) and I ought to be able to work it out for you ;-)

Xtremeteam:
it might have come across as me being smart but wasnt intended that way, :wink:

denviks:
you have a pm tim mate  :wink:

Richie_EB4:

--- Quote from: "muddyweb" ---

If you don't fancy stripping it down... PM me your VIN number and the axle number (stamped on the casing just to the right of the diff housing when viewed from the front usually) and I ought to be able to work it out for you ;-)
--- End quote ---


All ways nice to know..........cheers

Navigation

[0] Message Index

[#] Next page

[*] Previous page