Vehicle & Technical > Series Land Rovers
Blind
hobbit:
or get a roof rack :wink:
muddy_90:
if u go with the rack rack idea, ive got one which i dont need any more
hobbit:
If you dont want to drill the top, how about mounting the lamps low down, in the rear cross member
rustprooflandyracer:
It has already been done now, I Did what Jim-willy did drilling 4 holes, 3 for the actual lamp and 1 for the wire. I used 6mm bolts, putting gromits between the metal face and the roof to stop vibrations and it seal the hole. Then i used some clear sealent to block the holes up and stop the extra water leaks :). Looks great now, wired it in to the rear number plate feed so it is only on when the lights are on, then using a switch on the back of the actual unit to work it.
Porny:
--- Quote ---wired it in to the rear number plate feed so it is only on when the lights are on, then using a switch on the back of the actual unit to work it.
--- End quote ---
Through a relay I hope, complete with seperate live feed and fused....
Please don't say you've just tapped into the number plate feed wire, and use this to power the light.... :shock:
Ian
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version