Vehicle & Technical > Series Land Rovers
Blind
muddy_90:
it does take a bit of time to flatten it or unless my battery rubbish but they are going to be running of another battery on sunday and putting in split charging aswell.
muddy_90:
ive just been told they are not led, it turns out they are bulds. I ask him to put led ones in. :evil:
jimthelandyman:
i havn't used a relay on mine i just used an inline fuse.
Porny:
As long as you wire and switch can take the load then its fine not to go through a relay...
In all honesty I don't suppose it is strictly needed.
One 55W bulb will only be drawing a max of 4.5Amp's in theory so as long as your switch and wire can take this (with enough of a safety factor) then it would be ok...
Ian
Xtremeteam:
--- Quote from: "Porny" ---As long as you wire and switch can take the load then its fine not to go through a relay...
In all honesty I don't suppose it is strictly needed.
One 55W bulb will only be drawing a max of 4.5Amp's in theory so as long as your switch and wire can take this (with enough of a safety factor) then it would be ok...
Ian
--- End quote ---
all though having had to put a fire out on my own motor i would advise to use a relay all the time no matter what you are wiring up :wink:
Navigation
[0] Message Index
[*] Previous page
Go to full version