Vehicle & Technical > Range Rover

can anyone help

(1/2) > >>

madgaz42:
can anyone help me i have got a kit to put a ford transit di engine in my old rr  but have no ins/on how to do it if anyone could help me ...thank,s gary  :?   [/list]

Vauxuki:
Hi,
We used to have a 2dr rangie with a transit Di engine in it.

We had it for a good few years and proved to be very reliable,  not the quicket thing in the world, but very economical.

Let me know what you need help with and ill do my best to help you out, i see your not too far away, only wolverhampton.

madgaz42:
well i got my self  a milner conversion transit to RR box  off ebay  but they can not find the fitting ins--to fit it        i-e  how to do it


at the mo  it has the VM2.5 t
i need to no if you use the vm f-wheel  or the transit  f-wheel  and any  more  info in how to fit it in  
thank,s gary

muddyweb:
Have you tried Milner ?

They are pretty reasonable and will likely give you some advice.

Vauxuki:
Had a word with my dad, unfortunatly he cant remember it too well as it was a good few years ago.
We are pretty sure you have to use the transit flywheel, but not 100% certain.
What parts have you got in the kit?
Another thing to mention is that the transit inlet manifold needs altering, if there isnt one with the kit.
There should be some dowels, and some special bolts, and some new engine mounts to weld onto the chassis.
What gearbox do you have at the moment, the kit we had was for the 4speed box.
Hope this helps a bit, any other things feel free to ask, ill try to help. :D

Navigation

[0] Message Index

[#] Next page