Vehicle & Technical > Range Rover

EAS reset software Not working HELP!!!

(1/3) > >>

Brett69:
OK I have just fitted new airbags to my P38 an have the http://www.rswsolutions.com/ lead & software to plug into the car. When I click Initialize it starts to scan/check but keep getting NO IDLE so guessing not good comms, I have changed the idle speed but still no joy. Anybody used this system or local enough with another system to help me out.

Many Thanks Brett

gingernutsv8:
I got one of those found it was crap so took my car to landranger services

Brett69:
Wow thats alot cheaper than I thought I'd be paying, Maybe worth a trip to my local dealer then

Yoshi:
Ive had the same problem recently.

I am going to fix my system by bypassing the ecu completely.

You can raise and lower the suspension by jumping pins on the ecu connector, so am going to disconnect the ecu and put a manual switch in that will raise and lower the suspension manually :)

Brett69:
I would love to do that if I could use the factory switch. Any details on how to do this?

Navigation

[0] Message Index

[#] Next page