Fun, Friendly and Free
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Forum back online. Please post!
Home
Forum
Battle
Search
Login
Register
Mud-club
»
Vehicle & Technical
»
Range Rover
»
Towing a sankey trailer with a P38
Print
Pages: [
1
]
Go Down
Author
Topic: Towing a sankey trailer with a P38 (Read 11621 times)
0 Members and 1 Guest are viewing this topic.
DMJ51X
Posts: 9
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
Referrals: 0
Towing a sankey trailer with a P38
«
on:
November 19, 2010, 14:08:24 »
Hi I currently have a 300tdi disco but am thinking about buying a P38. I tow a sankey trailer behind the disco with a nato hitch fitted to a heavy duty rear bumper. Can I get the same style of bumper for a P38? Does any body tow a sankey behind a P38 and if you do what set up have you got?
Cheers
ralph
Logged
Brett69
Posts: 114
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
Referrals: 0
Re: Towing a sankey trailer with a P38
«
Reply #1 on:
November 19, 2010, 17:04:29 »
I don't but would love too, I tow alot of different trailers behing my P38 from hoarse boxes to cars on trailers an multi bike trailer, tows great an never had any problems
Logged
Have 4wd Need MUD!!!
P38 Range Rover
Power chipped
Bull Bars
Roof Rails
CB Rig
3" Body Lift
32" Goodyear MTR's
Modified Bumpers & exhaust system
Need Snorkel an winch bumpers
DMJ51X
Posts: 9
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
Referrals: 0
Re: Towing a sankey trailer with a P38
«
Reply #2 on:
November 20, 2010, 04:32:15 »
Its getting the height of the Nato hitch correct that i am worried about - i have had a look around on the web but so far havent found anything.
Logged
Brett69
Posts: 114
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
Referrals: 0
Re: Towing a sankey trailer with a P38
«
Reply #3 on:
November 21, 2010, 10:08:12 »
the towbar on my p38 is really too high for all the trailers I tow so don't think you'll have a problem, Plus I now have a body & suspension lift lol! or will have soon as I can get my eas reset :(
Logged
Have 4wd Need MUD!!!
P38 Range Rover
Power chipped
Bull Bars
Roof Rails
CB Rig
3" Body Lift
32" Goodyear MTR's
Modified Bumpers & exhaust system
Need Snorkel an winch bumpers
Range Rover Blues
Moderator
Posts: 15218
Attack: 100
Defense: 100
Attack Member
Karma: +3/-0
South Yorkshire
Referrals: 0
Re: Towing a sankey trailer with a P38
«
Reply #4 on:
November 22, 2010, 22:45:22 »
Nato hitch want sot be a lot higher than a standard tow hitch. Typically around 16-18 inches to the top of a towball (though our Brian James car trialer sat lower) whearas a Nato should be at least as high up as the crossmemeber on a 110.
Logged
Blue, 1988 Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.
DMJ51X
Posts: 9
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
Referrals: 0
Re: Towing a sankey trailer with a P38
«
Reply #5 on:
November 24, 2010, 00:58:10 »
Yeah i know - but what height is a normal towbar set up on a P38 compared with a 90 / 110 rear cross member? As I said on my Disco I use a NATO hitch fixed to the bumper which is a bit low but tows OK.
Logged
Range Rover Ron
Posts: 460
Attack: 100
Defense: 100
Attack Member
Karma: +1/-0
Bebington, Wirral.
Referrals: 0
Re: Towing a sankey trailer with a P38
«
Reply #6 on:
March 01, 2012, 11:12:32 »
Hello mate,
regarding you issuewith the P38/Sankey...........
I have a P38 and a Sankey trailer.
I have not towed the Sankey yet with the P38 but can suggest the following.......
Try lower profile tyres and the trailer,
I'm looking at fitting standard LR alloys to my Sankey which will lower the height of the Sankey as the normal military standard tyres have a tall side wall.
also the P38 can be "locked" in any suspension setting, so you can set the height to "high/off road" and lock it, this will give the P38 a 2" lift.
doing both these things will probably get you as close to a good tow height with the Sankey as you'd need to be.
that is what I'm going to do ASAP.
Good luck,
Ron.
Logged
Ronnie Wood, LLROC
Suicide:- a permanent sollution to a temporary problem!
ONE LIFE. LIVE IT.
James.Harwood
Posts: 303
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
Referrals: 0
Re: Towing a sankey trailer with a P38
«
Reply #7 on:
March 01, 2012, 19:26:04 »
I wouldn't advise towing with the suspension raised.
Logged
lambert
Moderator
Posts: 2137
Attack: 100
Defense: 100
Attack Member
Karma: +1/-0
and then as if by magic
harrogate
Referrals: 0
Re: Towing a sankey trailer with a P38
«
Reply #8 on:
March 01, 2012, 20:30:50 »
Also if the car is after 1998 vintage then you ought to have a type approved tow hook which a pintle is not.
Logged
Lambert Coverdale.
As slow as possible, as fast as necessary.
Two and a half litres of turbocharged diesel goodness.
Range Rover Ron
Posts: 460
Attack: 100
Defense: 100
Attack Member
Karma: +1/-0
Bebington, Wirral.
Referrals: 0
Re: Towing a sankey trailer with a P38
«
Reply #9 on:
June 07, 2012, 10:39:53 »
I'm thinking of making an adaptor for the P38.
My thinking is to have a tube just inside the ID of the hook on the Sankey, have a locking pin in the top of the tube to hold the tube in position and slide the tube down insode the hook up to the pin, then have a plate welded to the bottom of the tube and fix a "normal/Standard" tow hitch to the plate. I know it is not "Type approved" but there are a few Land Rovers out there wtih a non-type approved tow hitch set ups on their Land Rovers which are probably better and stronger than the Type approve type!
Then again it might be easier just to sell the Sankey!
Logged
Ronnie Wood, LLROC
Suicide:- a permanent sollution to a temporary problem!
ONE LIFE. LIVE IT.
Moneypit
Posts: 96
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
Referrals: 0
Towing a sankey trailer with a P38
«
Reply #10 on:
June 07, 2012, 16:29:07 »
There is a type approved hitch available from Sparex 10642. This will tow a Sankey.
Logged
Sometimes you need to get away from the crowd, the only way to do that, is to get a little mud on the tyres.
Range Rover Ron
Posts: 460
Attack: 100
Defense: 100
Attack Member
Karma: +1/-0
Bebington, Wirral.
Referrals: 0
Re: Towing a sankey trailer with a P38
«
Reply #11 on:
June 09, 2012, 09:31:08 »
Thanks moneypit, I'll check it out.
Logged
Ronnie Wood, LLROC
Suicide:- a permanent sollution to a temporary problem!
ONE LIFE. LIVE IT.
Range Rover Ron
Posts: 460
Attack: 100
Defense: 100
Attack Member
Karma: +1/-0
Bebington, Wirral.
Referrals: 0
Re: Towing a sankey trailer with a P38
«
Reply #12 on:
June 09, 2012, 09:43:27 »
Hi Moneypit, I've had a look at Sparex and I think you may mean the dual use ball and locking hitch, the hitch is not the problem it is the height of the hitch, I can use a similar hitch, a NATO hitch, a pin and ball or a normal 50mm ball type hitch. The real problem is then the height of the coupling with the Sankey sitting at almost 45 degrees and not looking right. I need to lift the height of the Sankey/NATO hitch to have the trailer more in line with the P38, I know you do need a bit of noseweight so I'm not looking for level but need a way to get the unit sitting right and looking safe. If I raise the hitch it will also give me problems with the tailgate dropping onto the riased hitch so making a tube type coupling to the correct height seems to be the way to go. Cheers,
Ron.
Logged
Ronnie Wood, LLROC
Suicide:- a permanent sollution to a temporary problem!
ONE LIFE. LIVE IT.
Print
Pages: [
1
]
Go Up
Mud-club
»
Vehicle & Technical
»
Range Rover
»
Towing a sankey trailer with a P38
SimplePortal 2.3.5 © 2008-2012, SimplePortal