Chat & Social > The Bar - General Chat

Chrome bumpers

<< < (2/2)

andyhubbard:
Hi guys, there on a M plate at the mo and have the indicators in the bumper on the rear and yes i think i'll remove and sell on very cheaply. If i go with the winch i will also sell the abar and spots as well.

Disco Matt:
You can just fit a winch bumper without the winch. That will usually get you some decent front recovery points and maybe hilift jacking points. Just have a very close look before buying if headlight washers are important to you - not all winch bumpers are the right shape or have the holes to fit these into.

andyhubbard:
True Matt,i must admit to thinking this way and as regards to headlight washers there just something else to break. Shape wise i prefer the square rather than round and also going down the side of the front wing.

Disco Matt:
I don't think the tubular ones look right on a Disco, it's down to personal preference though.

Mine would be great, if my steering guard hadn't bent and tugged the tip of the right hand chassis rail down by 2mm. As a result the bumper doesn't sit level, attempts to elongate the holes and adjust it weren't successful. Still need to get around to taking it to a local fabricator and asking for his advice on how to sort it as neatly, solidly and cheaply as possible. It also sits too low, so I think new brackets may be needed. I won't be adding a winch until I've got it level and solidly bolted in, at present it only has one of the towbar-sized bolts installed as the other hole doesn't line up.

Navigation

[0] Message Index

[*] Previous page