AuthorTopic: speedo not working  (Read 1598 times)

0 Members and 1 Guest are viewing this topic.

Offline figgy

  • Posts: 20
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
speedo not working
« on: May 17, 2010, 21:44:17 »
i have just change my tyres to235-85 -16 on my 1994 rrc tdi ,at the weekend i changed the  speedo drive on the transfer box  for the blue gear for 235-85- 16 ,since then i can not get a reading  .it has the electric transponder on the transfer box ,is there  any way to check this is working
1983 110 4LTR TD PHAZER
1995 RRC 300TDI

Offline Bowie

  • Posts: 204
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: speedo not working
« Reply #1 on: May 18, 2010, 09:09:40 »
Take the speedo drive out of the transfer box, and try the cable in the square, my bet is that it is too big...

I swapped the BW transfer box to an LT230 and found exactly this issue, I used the gear from the BW box in the end, which fits fine, and the speedo isn't THAT far out, and I am on 33" tyres.

TBH, going from 205 to 235 tyres makes not a lot of difference to the speedo, maybe 8% under reading...

1980 SIII Lightweight 2.25 Petrol - completely standard.
1991 Range Rover Vogue SE 3.9 V8 - now on LPG (sorted!), 2" lift, mud tyres, and more to come...

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: speedo not working
« Reply #2 on: May 20, 2010, 22:55:47 »
It makes 10%, which coincidentally is how inacurate many LR speedos seem to be.

The electronic spped signal also goes to the cruise control, air suspension and engine ECU.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline hairyasswelder

  • Posts: 1351
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • It's gonna cost ya
  • Referrals: 0
Re: speedo not working
« Reply #3 on: May 21, 2010, 22:36:29 »
It makes 10%, which coincidentally is how inacurate many LR speedos seem to be.

The electronic spped signal also goes to the cruise control, air suspension and engine ECU.

I can agree with that as mine read correct according to tom tom using colway c-trax  ;)
'88 RR 3.5 efi, an on going project :o) evolving daily/slowly

Offline dod51e

  • Posts: 240
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • Referrals: 0
Re: speedo not working
« Reply #4 on: May 21, 2010, 23:10:53 »
Mine reads 26 when Road Angel and Tomtom say 30 with 255/85/16.  oddometer is out by 14.5% too (at least I have improved my mpg now| :dance:)

Offline vougese39

  • Posts: 25
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: speedo not working
« Reply #5 on: May 24, 2010, 22:56:44 »
look at the size of the square drive in the speedo drive they are different sizes weather it has cable or tranducer
ARMSONAE FIRST AID FOR YOUR LAND ROVER!
THE ONLY UKWIDE MOBILE LAND ROVER SPECALIST
FULL DIAGNOSTICS 1990-2010 MY!
MUDCLUB 10% LABOUR DISCOUNT
http://armsonae.webs.com/  EMAIL armsonae@yahoo.co.uk/ 
07977051769
SEE ME AT STAND G1,G2,G3 AT LRO PETERBOG 2011

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal