Vehicle & Technical > Series Land Rovers

another stupid question..

(1/2) > >>

brixworth-alan:
How do I undo clevis joints?

See, told you it was stupid question but I can't seem to figure it out.

cheers
Alan

Saffy:
Remove the retainer clip/spring/split pin and drive the clevis pin out from that retainer end (should push out with finger pressure). Sometimes the retainer clip is physically part of the clevis pin, usually have to unclip  and flip it before it can be removed. 

Lucy1978:
Some of the ones on the hand brake linkage have a threaded portion to the clevis pin, so remove split pin then unscrew the clevis pin.

brixworth-alan:
Thanks! It was indeed threaded- so now have it sussed thanks to you guys

Welshbreed:
Seeing as that has been cleared up...

## evil thread jack ##

wot's the name of the plate holding the springs to the axle, the one the U bolts tie to, i didn't see the name/part # in the manual and can't seem to find it on axle part lists, the ones i have are rather corroded and i'd like to get some new ones if i can

Navigation

[0] Message Index

[#] Next page