AuthorTopic: P38 heater need help please  (Read 1697 times)

0 Members and 1 Guest are viewing this topic.

Offline howlinmadmartin

  • Posts: 29
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Buy it, drive it, weld it, break it, weld it again
  • Referrals: 0
P38 heater need help please
« on: January 20, 2010, 13:06:24 »
Hi guys I have a p38 1997 RR with aircon that only blows out cold air, the engine is running normal temp and both heater pipes are hot. I was told that there may be a servo stuck does anyone know which one or are there any other suggestions. Many thanks in advance,
Martin
its a land rover, "they all do that sir!!!"

Offline Tel

  • Posts: 253
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • 300 tdi disco toybox
  • Referrals: 0
Re: P38 heater need help please
« Reply #1 on: January 20, 2010, 14:40:43 »
mine had this problem on the drivers side only its the blend motor failed you might have a book emblem on your display telling you

most people say its a dash out job but it can be done without the dash comming out alot of work thou thats why ive put it off for so long

search for p38 blend motor theres loads of info on them 

while your at it replace the matrix o rings as they will more than likely start to leak once you have upset everything so will mean dash out again for £1 worth or o rings
Hawk Performance Vehicles

Offline Brett69

  • Posts: 114
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: P38 heater need help please
« Reply #2 on: January 20, 2010, 16:18:49 »
I have a P38 I'm breaking if you need parts, the dash is untouched bar the switches an heater panel. Thanks Brett 07766 005443
Have 4wd Need MUD!!!

P38 Range Rover
Power chipped
Bull Bars
Roof Rails
CB Rig
3" Body Lift
32" Goodyear MTR's
Modified Bumpers & exhaust system

Need Snorkel an winch bumpers

Offline howlinmadmartin

  • Posts: 29
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Buy it, drive it, weld it, break it, weld it again
  • Referrals: 0
Re: P38 heater need help please
« Reply #3 on: January 20, 2010, 19:24:00 »
Thanks fellas don't want to take the dash out if I don't have to,will have a look tomorrow and re-assess the situation. Many thanks.
its a land rover, "they all do that sir!!!"

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal