Vehicle & Technical > Discovery

clutch fork ?

<< < (2/3) > >>

stretchy:
personly I would drop the box and fit a new clutch in the prosess if you have time and the mony.. when you get a new fork get a hd one or weld a flat bit of steel on the back before you put it back in. its realy not that bad if you have a few lads to help lift it

stretchy

Range Rover Blues:
Can you fit the cast one from a RRC?

gtomo2:
just took it to a local landy garage. For them to do the job so with new clutch fork new clutch and sort out a leeking o/s front hub bill will be about £380. Only bonus was got a courisy car off them shame its a feasta.

Range Rover Blues:
Well the clutch was heading for £100 of that, so not too bad given how much work it is.

bilge rat:
a bit late but yes it is possible , but a little tight. i actually replaced the spigot brg this way . messed it up the first time i did it (when i took the box totally out) and was so anoyed was convinced the box wasnt coming out  again. rear mains leaking now .that'll teach me not to use gen parts :doh:

Navigation

[0] Message Index

[#] Next page

[*] Previous page