Vehicle & Technical > Range Rover

Auto to Manual

(1/3) > >>

Lewis.J.P_1987:
If I get hold of a manual box what else will i need to covert to manual excluding the clutch flywheel etc.

Pedal Box and Master cylinder for the clutch?

howlinmadmartin:
Why do you want to go manual mate is there something wrong with ur auto box. Have u got it going yet mate. I cant think of much else really other than pedal box, clutch hydraulics, flywheel, gearbox maybe brake master cylinder not sure tho. What about props are they the same.

Lewis.J.P_1987:
Still not running yet. I was just weighing up options, if I can’t get it started there’s a lump on eBay with a manual included. I’m rechecking the ignition timing tomorrow as I originally did it of the timing mark on the crank pulley, but just reading around on the net this can be off sometimes, so I shall take the spark plug out of no1 cylinder and bodge a screwdriver in there to confirm tdc, then start again. If it dont work im stumped for ideas why it wont fire.

I completely emptied the car today seats & everything. Got rid of most of the mud. I was just checking for rust. Which there isn’t any...? Ha ha!  :lol:

howlinmadmartin:
Ok dont rub it in is there anything at all when u crank it i can pop round tonite on me way home and we can try jumping it if u like. I take your getting fuel now after u changed every thing over. 

Lewis.J.P_1987:
 :D Got it running! timing was out. I used old dizzy aswell in the end. It idles high around 2000rpm so thats either timing or the air bypass valve. Smoking like a beast though, Im hoping its the residual oil in the exhuast from the old engine. That or i got confused and refit the old engine after taking it out? :oops:

Navigation

[0] Message Index

[#] Next page