AuthorTopic: RRC brake system diagram  (Read 1495 times)

0 Members and 1 Guest are viewing this topic.

Offline paulmmc

  • Posts: 55
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
RRC brake system diagram
« on: October 12, 2009, 14:17:16 »
Hi,
I'm nearing the end of the rebuild of my 1987 RRC 3.5 V8 Efi, with only a disctinct lack of brakes stopping me going for a drive. While I am happy enough to plumb all the pipes and that, I have been looking for a good schematic diagram of the layout. The Haynes manual shows a very basic one with the primary and secondary circuits but doesnt show pressure reducing valves etc. Anybody have a good diagram to make sure i dont miss any important bit?

Thanks.
1981 Series III, Petrol SWB
1987 Rangie 3.5V8 Auto
(Both of the above soon to become one hybrid!)

Offline Lewis.J.P_1987

  • Posts: 129
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • "Roads?....where we're going, we don't need roads.
  • Referrals: 0
Re: RRC brake system diagram
« Reply #1 on: October 12, 2009, 14:36:54 »
Hey,
I have the complete Rave manual for the car, what exactly do you need?



« Last Edit: October 12, 2009, 14:41:51 by Lewis.J.P_1987 »
[img width= height=]http://www.youtube.com/watch?v=w5xhMRptpho[/img]   http://www.youtube.com/user/LewisJP1987

Offline paulmmc

  • Posts: 55
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: RRC brake system diagram
« Reply #2 on: October 12, 2009, 16:52:32 »
That would be great.

Basically i need an idiots guide of what should connect to where. There are 4 outlets from the master cylinder, and 4 inlets into the fron two claipers and 2 into the rear calipers, so where in the runs should i be installing pressure reducing valves, T pieces, etc, if any are required.
A good schematic diagram should do the trick if possible, so that i have something to check my work against.

Thanks, paul
1981 Series III, Petrol SWB
1987 Rangie 3.5V8 Auto
(Both of the above soon to become one hybrid!)

Offline paulmmc

  • Posts: 55
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: RRC brake system diagram
« Reply #3 on: October 13, 2009, 10:43:16 »
I had a look for the Rave file last night in t'interweb and found exactly what i was looking for, I can't believe i've done so much work without it, it is really good!
But this is the picture i was looking for.



Cheers
1981 Series III, Petrol SWB
1987 Rangie 3.5V8 Auto
(Both of the above soon to become one hybrid!)

Offline Lewis.J.P_1987

  • Posts: 129
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • "Roads?....where we're going, we don't need roads.
  • Referrals: 0
Re: RRC brake system diagram
« Reply #4 on: October 13, 2009, 11:18:45 »
Yes if found it really useful especially when sorting out the EFI system on my truck.
[img width= height=]http://www.youtube.com/watch?v=w5xhMRptpho[/img]   http://www.youtube.com/user/LewisJP1987

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal