AuthorTopic: advice please on a rangerover 3.5 vogue  (Read 1020 times)

0 Members and 1 Guest are viewing this topic.

Offline bastynitch

  • Posts: 45
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
advice please on a rangerover 3.5 vogue
« on: September 11, 2009, 02:22:33 »
Just bought a rangerover 3.5 vogue, what is the biggest tyre it will safely hold , with spacers of course ? :huh:
I have a two door rangie currently being bobbererd and soon to be pink
also diesel frontera

Offline TechnoTurkey

  • Posts: 707
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: advice please on a rangerover 3.5 vogue
« Reply #1 on: September 11, 2009, 13:03:42 »
Depends really, do you have a body lift or suspension lift and are the arches shandard, spacers won't have much impact at all.
2007 Honda Civic Type R GT
1982 VW Camper - Current Project
1991 Pajero SWB 2.5TD - SOLD
1990 Range Rover Vouge 3.9 V8 - SCRAPPED
1989 110 3.5 V8 CSW - SOLD
1984 Series 3, Ex MoD, 109 SOLD
1986 90 2.5D Pick Up - SOLD

Offline clbarclay

  • Posts: 1615
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: advice please on a rangerover 3.5 vogue
« Reply #2 on: September 11, 2009, 13:47:04 »
Standard a 245/70r16 is around the limit on an range rover. I know 225/75r16 fit nicely.
With a little work common larger tyres such as 235/85r16 can be fitted. With more time, effort, cost and compromise then potentially any size tyres could be fitted.

If you are going to the effort of increasing tyre size then I would recomend going for at least a 32" tall tyre (eg 235/85r16 or 265/85r16) as this is a very common size fitted to defenders and other modefied land rovers, resulting in many ruts ending up that deep. Given the recent rise though in the number of prople using even bigger tyres, the advantage of upgrading to 32" tyres has been deminised.

Spacers can be a mixed blessing, they can push the tyre out wards so that instead of fitting nicely up into the wheel arch, they catch on the outer pannels.

Also increasing suspension travel can cause problems fitting bigger tyres. With a Gwyn Lewis challenege kit even standard 205r16 tyres of factory alloys can rub :lol:


Do note that sizes quoted in tyre side walls are only nominal figures and actual sizes can vary a fair bit.
Chris

Various range rovers from 1986 to 1988 in various states
Locost sports car based on mk2 escort - currently working on brakes, fuel and wiring

Offline squaddie_fox

  • Posts: 386
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: advice please on a rangerover 3.5 vogue
« Reply #3 on: September 16, 2009, 12:08:41 »
i had 235/85 R16 mud tyres fitted to a bog standard rangie on disco alloys. they fitted perfect with a slight rub on full articulation. i did do a couple of greenlane sessions and an off road play day before i fitted a 3 inch lift and they performed really well.

235/85 special tracks, 3.9 V8, HD bumpers, +3 inch lift, +5 shocks f&r, 12000lbs champion winch, heavy duty steering bars, CB and a snorkel....

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal