AuthorTopic: noisy vibration  (Read 9843 times)

0 Members and 1 Guest are viewing this topic.

dingabell

  • Guest
noisy vibration
« on: March 29, 2005, 22:54:57 »
Can any one help, I have a classic rangie and she has started making a noise and there is a deffinate vibration at the same time, but it only happens as the power is taken up by the engine or as I release the throttle to slow down.
Any suggestions would be greatfully recieved.

Thanks in advance.

Offline muddyweb

  • Posts: 6382
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
noisy vibration
« Reply #1 on: March 29, 2005, 23:05:25 »
Sounds like a propshaft, or maybe a diff pinion bearing.

Park it on level ground, get underneath and give the propshafts a good wiggle to check for movement.
Tim Burt
Muddyweb
-------------------------------------------------------------------------------------------------------------------
www.muddyweb.com
-------------------------------------------------------------------------------------------------------------------

dingabell

  • Guest
noisy vibration
« Reply #2 on: March 29, 2005, 23:38:09 »
Thanks
Done that though, and changed the front transfer box bearing as a result, but it is still doing it.  diffs seem to be ok, not that I know much about them.  How would I know if it's the diff pinion bearing, same thing with the props?

Offline muddyweb

  • Posts: 6382
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
noisy vibration
« Reply #3 on: March 29, 2005, 23:50:28 »
OK... have you done anything else before I start guessing ?  ;-)

Pinion bearing wear would normally show up by lateral movement in the drive flange.  Check at both ends, also see if the handbrake drum is moving about.
Tim Burt
Muddyweb
-------------------------------------------------------------------------------------------------------------------
www.muddyweb.com
-------------------------------------------------------------------------------------------------------------------

Offline landyman Ash

  • Posts: 1661
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
noisy vibration
« Reply #4 on: March 29, 2005, 23:55:37 »
I would say diffs, props or Ujs aswell.  Especailly if its power related.  

Leave the hand brake off, chock the wheels and try and move the props.  Look for play etc.

If nothing, jack up one side completely (becareful!!) and look for excessive play in the diffs or drive train.

My money is on the probs  :D
Ashley (but everyone knows me as Ash...)

Roxanne the 88" 300tdi auto Hybrid Trayback thats broken more than its fixed
Rosie the 300 Tdi auto disco that picks the hybrid up when broken...
Daisey the trailer that sits behind Rosie and lies under Roxanne.
The sexy threesome!!!!!!


Offline Nugget 4x4

  • Posts: 160
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
noisy vibration
« Reply #5 on: May 08, 2005, 20:54:03 »
I had this on my 3.5  efi Vogue and it turned out to be the uj on the front prop 8)
When all the oil has drained out the leak stops.
Disco 300 tdi Commercial
Classic Range Rover
Series 2a soon to have V8 Power



Offline hobbit

  • Posts: 4750
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
noisy vibration
« Reply #6 on: May 08, 2005, 20:55:43 »
All of a sudden it seems time for transmission problems, prop u/js, seals, bearings
Kev

'91 stretch Discovery 200 Tdi
Hybrid for running round (got to go now)
Srs 3 Lightweight petrol (got to go)
Srs 3 Lightweight petrol, runabout

Not every problem can be solved with duct tape, and it's exactly for those situations we have WD 40

Offline scooby

  • Posts: 201
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
noisy vibration
« Reply #7 on: May 10, 2005, 00:15:30 »
i had this on my disco and it truned out to be the uj check your play in the props.
Marc and Annie
----------------
http://Http://members.mud-club.com/profiles/scooby/
defender and disco owner.
name of defender-betty boop

Offline karloss

  • Posts: 849
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
noisy vibration
« Reply #8 on: May 10, 2005, 04:07:18 »
A mate of mine had something similar on a MK2 escort. Turned out to be part of a dead cat. Don't suppose that's a possiblity?
Cheers, Karl..


Listen mate, you've more chance of a go on the wife than you have of a go in my truck.

1990 90 TD
2008 Nissan Pathfinder sport.

Offline hobbit

  • Posts: 4750
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
noisy vibration
« Reply #9 on: May 10, 2005, 17:33:41 »
:lol:  :lol:

messy :shock:
Kev

'91 stretch Discovery 200 Tdi
Hybrid for running round (got to go now)
Srs 3 Lightweight petrol (got to go)
Srs 3 Lightweight petrol, runabout

Not every problem can be solved with duct tape, and it's exactly for those situations we have WD 40

Offline scooby

  • Posts: 201
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
noisy vibration
« Reply #10 on: May 10, 2005, 17:52:30 »
having a dead cat could cause alsort of mess, on the truck are  even on your wallet. :(biglaugh):
Marc and Annie
----------------
http://Http://members.mud-club.com/profiles/scooby/
defender and disco owner.
name of defender-betty boop

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
noisy vibration
« Reply #11 on: May 12, 2005, 12:43:21 »
Quote from: "karloss"
A mate of mine had something similar on a MK2 escort. Turned out to be part of a dead cat.


Which part?
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal