AuthorTopic: Help - P38 radio wires  (Read 627 times)

0 Members and 1 Guest are viewing this topic.

Offline stuntman

  • Posts: 693
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Help - P38 radio wires
« on: July 15, 2009, 22:02:23 »
Well I picked up quite a nice P38 Auto 4.6HSE on low miles and a multipoint sequential lpg system and I have to say I love it.

However, the previous owner decided to cut EVERY wire that connected the orginal stereo to the loom,

I really need to know what wire does what as most of them are down right dangerous.

Does anyone know what all the wires do?

It does have a sub in the rear.

I have removed the orignal cd changer and replaced it with a sony 10 disc changer and I have run the correct cabling to the front.

If anyone could help that would be brilliant.

PS the truck is sitting outside with a load of electrical spaghetti  hanging out of where the dash used to be :)

Thanks in advance

Andi
1989 3.5slti Mazda powered 110DC

Erm ... I've lost my keys darling ... again!

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: Help - P38 radio wires
« Reply #1 on: July 17, 2009, 00:47:09 »
There'll be a bunch of wires for each channel I presume then possibly 3 more for the sub as the later cars had a 2 channel sub. You need to know if there is a factory amp fitted too, then there'll be 2 battery wires and an electric ariel wire that switches the amp on, a backlight wire and at least one ground.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal