Vehicle & Technical > Defender

Smoky td5

<< < (2/3) > >>

Landy Andy:
Done filters????????????

Andy

karloss:
Yep. Filters are all pretty new.

karloss:
OK, took the top off the rocker box and removed the injector loom, was pretty clean, considering where it lives. Cleaned the whole thing with switch contact cleaner, cleaned the top of the injectors in same manner, fired it all back together.
Just the same. Any more ideas?
Has anyone ever found the need to adjust the injector push rods (except when re-building obviously)?
 :-k  :-k  :-k

Hightower:

--- Quote from: karloss on June 25, 2009, 12:53:29 ---OK, took the top off the rocker box and removed the injector loom, was pretty clean, considering where it lives. Cleaned the whole thing with switch contact cleaner, cleaned the top of the injectors in same manner, fired it all back together.
--- End quote ---

Did you check the loom at the ECU end?

karloss:
I didn't to be honest. Not sure where the other end terminates. :oops: Is it in one of the big multi plugs on the bulkhead?

Navigation

[0] Message Index

[#] Next page

[*] Previous page