AuthorTopic: Relays  (Read 1168 times)

0 Members and 1 Guest are viewing this topic.

Offline R2D2

  • Posts: 156
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • "Old Tart" white, new "Jump-Jet" blue one 2xLPG
  • Referrals: 0
Relays
« on: June 10, 2009, 15:31:54 »
Hi Folks, guess who jumper-wired the wrong relay then?   :oops:

Just need to know if/how I remove the spades from inside the relay socket please?    Seems to have only cooked the earth wires from one connection  (pin 30 or 86) not sure which.

promise to put me glasses on this time  :doh:   :roll:  :roll:


Cheers
Rgds  David
:smiley:

Gosh, this water's deep!!! Only comes half-way up that duck.

Offline woody

  • Posts: 927
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 1
Re: Relays
« Reply #1 on: June 10, 2009, 17:40:17 »
pin 30 is the heavy live feed that is switched on using the relay (30 amp??)
86 is either live or earth for the switch (5 amp)
if you use a multi meter you should be able to check which is live and earth
Never underestimate the power of a sick mind !!!!
What would scooby doo!!!!
remember if you camp next to the toilets you get to meet everybody at least once over the weekend
R reg Discovery 300tdi  NAMED: Scooby Doo !

Offline R2D2

  • Posts: 156
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • "Old Tart" white, new "Jump-Jet" blue one 2xLPG
  • Referrals: 0
Re: Relays
« Reply #2 on: June 10, 2009, 18:00:09 »
Cheers Woody, but how do I get the connectors out of plug/socket?    Ta
Rgds  David
:smiley:

Gosh, this water's deep!!! Only comes half-way up that duck.

Offline 300TDi Disco

  • Posts: 412
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Relays
« Reply #3 on: June 10, 2009, 21:03:34 »
Hope the pic helps.
Let's Ave It.
One Life, Get One

Peugeot 206 XS
Fiat Ducato (work van)
Disco 300TDI


Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: Relays
« Reply #4 on: June 12, 2009, 23:11:20 »
All I can advise is plyers, if there isn't enough for you to reach then some major surgery is required.  It is possible to dismantle the fuse holder but it's very fiddly and they aren't designed to be stripped down.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline woody

  • Posts: 927
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 1
Re: Relays
« Reply #5 on: June 13, 2009, 07:22:36 »
when you place the wires into a relay plug they lock into position with a little clip on the back of the spade terminal to remove the spade terminal you need a fine screwdrive
slide it down the plug between the terminal and the plug and just bend the plug out of shape slightly
hope this helps i have done this a few times its easy with a bit of practice
Never underestimate the power of a sick mind !!!!
What would scooby doo!!!!
remember if you camp next to the toilets you get to meet everybody at least once over the weekend
R reg Discovery 300tdi  NAMED: Scooby Doo !

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal