Pages: [1]   Go Down

AuthorTopic: Series 2.25 starter motor - diesel/petrol  (Read 1130 times)

0 Members and 1 Guest are viewing this topic.

Offline Disco_Dennis

  • Posts: 83
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Nr Sandy, Bedfordshire
  • Referrals: 0
Series 2.25 starter motor - diesel/petrol
« on: June 10, 2009, 13:15:37 »
Hi all. 

Can anyone tell me if the starter motor from a diesel 2.25 can be used on a petrol 2.25?  :?

The one I have on the petrol is on its way out,  :'(  but I have a 2.25 diesel engine here (knackered!) with a good starter motor.  :)

I know the petrol has an inertia starter and the diesel is a pre-engaged type - but are they transferable?  :huh:

I'm pretty sure they are the same flywheel  [-o< - and therefore they should be interchangable?  :-k

I could just bolt it on - but I don't want to go and screw up my flywheel if it's wrong!  :doh:

Anyway - does anyone know for sure?   :huh:

Cheers...
Den.
Logged
1996 LRSV Ex HMC Rescue Discovery 2.8 Isuzu -  Lift, 235/85's, Light bar, Snorkel, RRC front bumper - You'll know it if you see it!!

1989 Silver 3dr Disco 200 V8  -  pickup project

Offline bogie

  • Posts: 695
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • IF IT AINT GOT LEAFS,ITS NO GOOD!!!!!!!!
  • Referrals: 0
Re: Series 2.25 starter motor - diesel/petrol
« Reply #1 on: June 11, 2009, 20:38:34 »
2.25 p and d 2.5 p and d  and 200 and 300 are all the same,just the solanoid is mounted on tdis and they are stronger motors.
Logged
1968 SERIES 2A ,200TDI TUNED,RANGE ROVER AXLES,ONE TON SHACKLES,CPC PARAS,ES3000,POLYBUSHED,ANACONDAS.                     1970 SERIES 2A, 200TDI TUNED,5 SPEED LT77 WITH LT230S TRANSFER BOX 1.211 RATIO.ZEUS DISKS ALLROUND.ES3000,MODIFIED 90 TANK,3.5 DIFFS.

Offline Disco_Dennis

  • Posts: 83
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Nr Sandy, Bedfordshire
  • Referrals: 0
Re: Series 2.25 starter motor - diesel/petrol
« Reply #2 on: June 15, 2009, 14:07:32 »
So a starter from any 2.25 or 2.5 will work fine, then?

Thanks for the info.

Den.

 :dance: :dance: :dance: :dance:

 :grin: :grin: :grin: :grin:
Logged
1996 LRSV Ex HMC Rescue Discovery 2.8 Isuzu -  Lift, 235/85's, Light bar, Snorkel, RRC front bumper - You'll know it if you see it!!

1989 Silver 3dr Disco 200 V8  -  pickup project

Offline bogie

  • Posts: 695
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • IF IT AINT GOT LEAFS,ITS NO GOOD!!!!!!!!
  • Referrals: 0
Re: Series 2.25 starter motor - diesel/petrol
« Reply #3 on: June 15, 2009, 16:46:14 »
they will all work on 2.25 and 2.5 .
Logged
1968 SERIES 2A ,200TDI TUNED,RANGE ROVER AXLES,ONE TON SHACKLES,CPC PARAS,ES3000,POLYBUSHED,ANACONDAS.                     1970 SERIES 2A, 200TDI TUNED,5 SPEED LT77 WITH LT230S TRANSFER BOX 1.211 RATIO.ZEUS DISKS ALLROUND.ES3000,MODIFIED 90 TANK,3.5 DIFFS.
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal