Pages: [1]   Go Down

AuthorTopic: I’ve welded my Bumper & A Bar combo and fitted/wired the Lightforce Spotlights.  (Read 4845 times)

0 Members and 1 Guest are viewing this topic.

Offline auf_wiedersehen_pet

  • Posts: 1179
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
I’ve welded my Bumper & A Bar combo and fitted/wired the Lightforce Spotlights.
« on: April 17, 2009, 16:47:06 »

Several months ago I asked this question. Many thanks for all of the replies.

Since then, I’ve welded my Bumper & A Bar combination and fitted/wired the Lightforce Spotlights too.

See what you think…….













I still need to make modified spotlight brackets as they are spaced out by a couple of large nuts! Also, I need to straighten the OS recovery point, refit the headlight washers and weld in the Hi Lift jacking tubes kindly supplied by Boss and Wizard.

For good measure I've added a couple of LED driving lights behind the grille. They come on with the ignition an go out when the sidelights come on.








Logged
Rob Steele

1995 Land Rover Discovery 300 TDi - Everyday Car (Ex Jap)
2007 Toyota Avensis 2.2 T-180 - Sensible Car (Ex TSB Bank)

Offline lcruiser100s

  • Posts: 66
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: I’ve welded my Bumper & A Bar combo and fitted/wired the Lightforce Spotligh
« Reply #1 on: April 17, 2009, 16:51:38 »
I love your front bar :clap:
Logged
http://www.mud-club.com/galleries/lcruiser100s
imported 105 landcruiser from Aus. Built for Everything.

Offline craig_midz

  • Posts: 397
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: I’ve welded my Bumper & A Bar combo and fitted/wired the Lightforce Spotlights.
« Reply #2 on: April 17, 2009, 17:55:45 »
looks too shiny an clean lol but other then that it does look a nice smart job nice truck u got there
Logged

Offline lee celtic

  • Regional Rep
  • *
  • Posts: 2680
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: I’ve welded my Bumper & A Bar combo and fitted/wired the Lightforce Spotlights.
« Reply #3 on: April 17, 2009, 18:29:58 »
That Truck just gets better and better  :clap: :clap: :clap:

I've been thinking of doing a front bumper for a while , You've just made my mind up  ;)
Logged
so many hills , so little time ....
discovery TD5
work in progress...lol

Offline karlo

  • Posts: 848
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • TATA The New Green Oval!
    • Swadlincote, South Derbyshire
  • Referrals: 0
Re: I’ve welded my Bumper & A Bar combo and fitted/wired the Lightforce Spotlights.
« Reply #4 on: April 17, 2009, 19:24:25 »
I did the same with mine, looks the dogs dnglies don't it  :thumbup:



http://www.mud-club.com/galleries/galleryimages/1236545179-9963-Photo365a.jpg
Logged

Offline hairyasswelder

  • Posts: 1351
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • It's gonna cost ya
  • Referrals: 0
Re: I’ve welded my Bumper & A Bar combo and fitted/wired the Lightforce Spotlights.
« Reply #5 on: April 17, 2009, 20:16:49 »
Blindin' job  :lol: :lol:

Really like it, job well done  ;)
Logged
'88 RR 3.5 efi, an on going project :o) evolving daily/slowly

Offline Jeff J J

  • Posts: 93
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: I’ve welded my Bumper & A Bar combo and fitted/wired the Lightforce Spotlights.
« Reply #6 on: April 17, 2009, 20:36:26 »
looks good mate well done.
Logged
1994 300Tdi 5 Door
Winch Bumper. Steering Guard. Bonnet Struts.Diff Guards. Rock Tree Sliders.
Checker Plate Rear Door Cover.2”lift.Camel Cut. Rear Work Light. 235/85/R16 on Black Zu Rims. Southdown Snorkel.Chequer Plating. Gulf Grill. Light Bar.
Wish list / Fuel Tank Guard. Winch. Side Exit Exhausts .Bucket Seat.

Offline Chris Putt

  • Posts: 366
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: I’ve welded my Bumper & A Bar combo and fitted/wired the Lightforce Spotlights.
« Reply #7 on: April 17, 2009, 22:37:20 »
Just needs to get muddy now.......
Logged
'Its Gripped'
'Its sorted!'
'Lets Offroad!'

Offline iann41

  • Posts: 36
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: I’ve welded my Bumper & A Bar combo and fitted/wired the Lightforce Spotlights.
« Reply #8 on: April 18, 2009, 08:51:09 »
Looks fab!

How much did it cost and where did you get the parts?

Could a novice do this too do you think?

Ian
Logged
'P'reg 300tdi ES Auto with EDC

Offline stageonesimmo

  • Posts: 310
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Y'Arte Et Me Arte'ies
  • Referrals: 0
Re: I’ve welded my Bumper & A Bar combo and fitted/wired the Lightforce Spotlights.
« Reply #9 on: April 18, 2009, 09:54:38 »
I'm taking it thats a deafener 'with air-con' A bar with the feet cut off and welded on?  If so I know what I'm buying next to go on my GD4x4 bumper..........

Nice job.

Your drive is really clean as well. :clap:
Logged
Son, life has a habit of kicking you in the ass and i only have vague recollections of when it wasn't kickin mine!

Offline auf_wiedersehen_pet

  • Posts: 1179
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: I’ve welded my Bumper & A Bar combo and fitted/wired the Lightforce Spotlights.
« Reply #10 on: April 18, 2009, 10:13:44 »
Quote from: iann41 on April 18, 2009, 08:51:09
Looks fab!

How much did it cost and where did you get the parts?

Could a novice do this too do you think?

Ian

It's like this...

Bits I used...
Devon 4x4 Bumper - Ebay - £265
Defender/Series A Bar (plus blue spotlights) - Ebay - £35 (Sold spotlights for £16)
Lightforce 240 Blitz Spotlights - Devon 4x4 - £230
Lightforce Security Nuts (4) - Devon 4x4 - £20ish

Tools/equipment I used...
Welder
Angle grinder
Tape Measure
Files
Sockets - to remove/replace bumper, etc.
Hammerite - Satin

The job went like this...

Spent weeks looking at the bits and thinking the job through - very important! It was obvious that the A Bar would not fit with its feet still on so chopped the feet off. I then propped it on the Disco with the help of a few bungees. See below.


Then I kept cutting until I got it to the correct height/angle. Cleaned both parts. Tack welded. Refitted the bumper and spots to double  check. Removed it. Welded, dressed and painted it. Refitted it and wired in the spots. See below.


A job like this can be done on any substantial bumper - not a standard one as it's too thin.

Watch out for "lowline" bumpers as there won't be enough room to mount the A Bar. The D44 has just about enough room to weld. The A Bar touches the grille at the back and the weld at the front is right on the front edge of the bumper. See below.


Can it be done by a novice - a lot of it can but you might need to make friends with you local welder.

Good Luck.

Logged
Rob Steele

1995 Land Rover Discovery 300 TDi - Everyday Car (Ex Jap)
2007 Toyota Avensis 2.2 T-180 - Sensible Car (Ex TSB Bank)

Offline karlo

  • Posts: 848
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • TATA The New Green Oval!
    • Swadlincote, South Derbyshire
  • Referrals: 0
Re: I’ve welded my Bumper & A Bar combo and fitted/wired the Lightforce Spotlights.
« Reply #11 on: April 18, 2009, 11:15:51 »
Mine is just a standard Defender 90/110 A bar welded to a Paidia winch bumper just need to get the angle and height of the cut right.
Logged

Offline mikiep1986

  • Posts: 352
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: I’ve welded my Bumper & A Bar combo and fitted/wired the Lightforce Spotlights.
« Reply #12 on: April 19, 2009, 00:57:24 »
very tidy looks very nice and the led lights look good aswell nice little touch well done  :clap:
Logged
200tdi disco aka "bertie" ;)

Offline auf_wiedersehen_pet

  • Posts: 1179
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: I’ve welded my Bumper & A Bar combo and fitted/wired the Lightforce Spotlights.
« Reply #13 on: April 19, 2009, 10:10:47 »
Quote from: stageonesimmo on April 18, 2009, 09:54:38
I'm taking it thats a deafener 'with air-con' A bar with the feet cut off and welded on?  If so I know what I'm buying next to go on my GD4x4 bumper..........

Nice job.

Your drive is really clean as well. :clap:

It was sold to me as a Series A Bar. My parents (who live in Stoke on Trent) picked it up from a guy in Liverpool so I never had a chance to confirm that.
Logged
Rob Steele

1995 Land Rover Discovery 300 TDi - Everyday Car (Ex Jap)
2007 Toyota Avensis 2.2 T-180 - Sensible Car (Ex TSB Bank)

Offline muddymud

  • Posts: 229
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: I’ve welded my Bumper & A Bar combo and fitted/wired the Lightforce Spotlights.
« Reply #14 on: April 21, 2009, 15:55:02 »
just to say that has to be the nice disco i have seen, and it looks soo good clean. i would be scared to take it offroad too nice.
Logged

Offline auf_wiedersehen_pet

  • Posts: 1179
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: I’ve welded my Bumper & A Bar combo and fitted/wired the Lightforce Spotlights.
« Reply #15 on: April 25, 2009, 12:40:43 »
Quote from: muddymud on April 21, 2009, 15:55:02
just to say that has to be the nice disco i have seen, and it looks soo good clean. i would be scared to take it offroad too nice.

Thank you very much - made my day!  :dance: :dance:
Logged
Rob Steele

1995 Land Rover Discovery 300 TDi - Everyday Car (Ex Jap)
2007 Toyota Avensis 2.2 T-180 - Sensible Car (Ex TSB Bank)

Offline adamdanshona

  • Posts: 47
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: I’ve welded my Bumper & A Bar combo and fitted/wired the Lightforce Spotlights.
« Reply #16 on: April 26, 2009, 22:08:50 »
Love the bumper,by the way where did you get the the grill?
Logged

Offline auf_wiedersehen_pet

  • Posts: 1179
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: I’ve welded my Bumper & A Bar combo and fitted/wired the Lightforce Spotlights.
« Reply #17 on: April 27, 2009, 19:08:48 »
Quote from: adamdanshona on April 26, 2009, 22:08:50
Love the bumper,by the way where did you get the the grill?

It's a geniune LR "Gulf State" or "Saudi" grille. They crop up on ebay between £40 and a whopping £200.

These are links to previous related threads...

http://www.mud-club.com/forum/index.php/topic,55749.msg496409.html#msg496409

http://www.mud-club.com/forum/index.php/topic,57245.0.html

http://www.mud-club.com/forum/index.php/topic,62744.msg540860.html#msg540860

« Last Edit: April 27, 2009, 19:22:01 by auf_wiedersehen_pet »
Logged
Rob Steele

1995 Land Rover Discovery 300 TDi - Everyday Car (Ex Jap)
2007 Toyota Avensis 2.2 T-180 - Sensible Car (Ex TSB Bank)

Offline chiboy

  • Posts: 79
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: I’ve welded my Bumper & A Bar combo and fitted/wired the Lightforce Spotlights.
« Reply #18 on: April 29, 2009, 01:03:03 »
 :cool: Was going to do that to mine as well but did this instead still to refit saudi grill but i,m going to have to cut it about  :cry:
« Last Edit: April 29, 2009, 01:10:35 by chiboy »
Logged
Green 3.9 v8 Auto on LPG,Green Range Rover LSE Wheels , Roof lights ,Big bore S/S Exhaust , Winch bumper, Spot lights, CB, Safari snorkle,steering guard,jate rings,235,70,16 BFG mud terrains,diff guard, saudi spec grill, 2"LIFT Discoparts tree sliders QT Bonnet pod, 10,000lbs WINCH WITH PLASMA ROPE AND REMOTE

Offline auf_wiedersehen_pet

  • Posts: 1179
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: I’ve welded my Bumper & A Bar combo and fitted/wired the Lightforce Spotlights.
« Reply #19 on: April 29, 2009, 21:32:29 »
Quote from: chiboy on April 29, 2009, 01:03:03
:cool: Was going to do that to mine as well but did this instead still to refit saudi grill but i,m going to have to cut it about  :cry:

Weird. I had strongly considered a bonnet pod but opted for my current set up.
Logged
Rob Steele

1995 Land Rover Discovery 300 TDi - Everyday Car (Ex Jap)
2007 Toyota Avensis 2.2 T-180 - Sensible Car (Ex TSB Bank)
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal