AuthorTopic: COIL SPRUNG L/WIEGHT  (Read 747 times)

0 Members and 1 Guest are viewing this topic.

Offline strawdude

  • Posts: 10
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
COIL SPRUNG L/WIEGHT
« on: April 13, 2009, 09:33:23 »
Has any one built one ? If so I am unsure what springs to use.I bought a 200tdi disco as a donor but want to put a 2" lift kit on also,but people tell me that it will sit up too high at the back so should I use all rear springs or all front springs or not disco springs at all?   :huh: 
  Oh yeah it will have a200tdi lump so will that drag the front down if I fit the same springs all round? Ihad to fit longer shackles on the back leaf springs when it had the v8 in it to make it sit level .
  If any one has any info or advise it would be greatly appreciated.   :)
  Thanx Mark.

Offline landy_bug

  • Posts: 115
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: COIL SPRUNG L/WIEGHT
« Reply #1 on: April 13, 2009, 10:09:04 »
be careful of current sva laws they might wanna retest could be alot of hassle
LIFE IS A WATE OF TIME AND TIME IS A WASTE OF LIFE, SO GET WASTED ALL OF THE TIME AN YOU'LL HAVE THE TIME OF YOUR LIFE


1981 Series 3 3.0 V6 (deceased)
2005 Freelander TD4 Commercial

Offline tony morton

  • Posts: 9
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: COIL SPRUNG L/WIEGHT
« Reply #2 on: April 13, 2009, 20:18:40 »
hia i  just put  heavy duty coil springs on mine with pro comp shocks i  also had 235/75/16 tyres on it sat very well
i hope this helps
tony

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal