Vehicle & Technical > Range Rover

my rrc rag top

<< < (2/4) > >>

muddymud:
it isn't bad for an offroader there are a few big dents if you look at the door and back wing. 

got a 2" lift sorted today been on the truck less than a month been to one offroad event costing me £100 just need to get mine off and get the new stuff on whoop whoop

will get some pictures up when i got it all on.

Cheers,
Nick

muddymud:
spent today getting the truck up in the air and all of the springs and shocks out. has been a pain as  i need to take all of the old stuff out so i can put it on the other truck when i take the 2" lift stuff out of it.

jacked up the front


front springs and shocks out


truck all jacked up front and rear shocks and springs out


what i would like my truck to look like, but the wheels let it down


now that's better  :D


now i need some dislocation cones, braded hoses and some spring retainers. will i need some extended bump stops as i have no bump stops on the rear and standard ones on the front.

could i put some 2" drop turrets and some 2" drop rear shock mounts on to give extra drop or are they only used for stock height springs and +2" shocks?

Cheers,
Nick

BobtailBogey:
looking good always good to see posts in progress..

yeah you can fit lowered mounts which would increas your axle movemnts as long as you have removed anti-roll bars etc... :)

that was the first think that went on mine.

muddymud:
got the front springs in last night. i have put the rear springs in the front as the rear spring are a lot more H/D, but all the weight in the front.

going to go and put the front springs in the rear and hope it sits ok.

my 2 week old lift kit that i got for £100


springs and shocks in

hairyasswelder:
Going well but [Edited] buy some axle stands  :shock: :shock: :shock:

Navigation

[0] Message Index

[#] Next page

[*] Previous page