Vehicle & Technical > Discovery

Oil leak help - im stuck at work !

<< < (2/3) > >>

davidlandy:
no.3 injector pipe is digging well into the oil breather pipe too - you might want to move that a tad.

wizard:
With the axle breather, just pull the plastic pipe off and unscrew the banjo bolt holding the breather in the axle. You might find that its clogged up with all sorts of crud.
I took mine off years ago and it sounded like i was opening a can of coke......

wizard :twisted:

tomkbucks:
ok well checked the oil in the axel and there was some in there - drove home on it so will get the hub seal replaced is it an easy job to do ?

also realised front wheel bearing has gone...

The Black plastic tube coming up from the oil filter - i think its the oil breather ? there is oil over this so think its spilt so will replace this - hopefully that wast he cause of my oil leak !

Les Henson:
This thread may help. It's actually replacing the hub with a new item, but does cover replacing the wheel bearings, etc.


http://forums.lr4x4.com/index.php?showtopic=15073


Les.

tomkbucks:
Thanks - looks quite easy to replace the wheel bearing !!!just need a hub nut remover...

Navigation

[0] Message Index

[#] Next page

[*] Previous page