Vehicle & Technical > Discovery

Discovery Diff Gaurd Mounting bolts

(1/2) > >>

bigwood:
I have just ordered a QT diff guard for my Disco, L-Reg 200TDI. Does any one know what mounting bolts I will need for the two holes underneath the nose of the diff please. :D

smith335:
I think they come with your diff gaurd,
i am sure my diff gaurd came with all the fittings.

ttfn

Andy41:
my front one came with all bolts required to fit just had to jiggle it abit so i could get to the drain plug

Disco-Ron:
Agreed, they come with metric and imperial bolts just in case....

if you're fitting it to the rear diff, and you have a hefty tank gaurd, make sure you get the top of the gaurd as far forward as you can... mine still hits my southdown tank gaurd.....

Steve ray:
They come with the necessary bolts to bolt the guard to the body of the diff, the top mounting bracket utilises two of the existing diff bolts. The kit also includes the small bolt to join the guard to the top bracket too.

Remember, if its a rear diff guard, you'll also need the wedge-shaped "spacer"

Navigation

[0] Message Index

[#] Next page