AuthorTopic: Lr 101 6 Stud Brake Disc?  (Read 1873 times)

0 Members and 1 Guest are viewing this topic.

Offline GMCD

  • Posts: 7
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Lr 101 6 Stud Brake Disc?
« on: November 13, 2008, 00:10:55 »
Hi,

I am looking at doing a brake disc conversion on a 6 stud 101 axle & was hoping to find a suitable disc to bolt on or machine to fit. (I know it won't be easy)

With the 6 stud 205mm PCD it doesn't leave much room to play with under a 16" rim, I have considered using 20" unimog rims

I have considered Range Rover Discs but feel that it would increase the track width too much.   

Does anyone know of a suitable suplier or another vehicle that uses 6 stud 205mm PCD?

Has anyone done their own conversion, I didn't find anything in a search of the forum.

I don't want to spend a large amount of money on a conversion kit as I'm on a budget , just though it might be worth asking on the forum.

Cheers, Marc
« Last Edit: November 14, 2008, 22:56:45 by GMCD »

Offline Bush Tucker Man

  • Posts: 9161
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Lr 101 6 Stud Brake Disc?
« Reply #1 on: November 30, 2008, 20:44:07 »
I seem to recall that it has been done on some of the 101's that made their way across 'the Pond'

The ones over here that I've seen (2 of them) have been extensively re-engineered to coil-springs, with Range Rover (or 110/130) axles, & 127/130/Wolf rims
Richard A Thackeray 
Defender 110Td5 'Heritage Gone, but not forgotten
Jaguar XKR; X88 JLT, also 'gone, but not forgotten'

Yorkshire Born & Bred, and proud of it.

"You Can Allus Tell A Yorkshireman, But You Can't tell Him Owt!"

Offline Lucy1978

  • Posts: 516
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Lr 101 6 Stud Brake Disc?
« Reply #2 on: February 19, 2009, 12:46:32 »
Zeuss do a 101 disk brake conversion but cheep isn't a word that describes it ~£1700 an axle.  There is a guy in the states who's using a 101 axle on a series 2 that is adapting some disks to fit. Personally I'd be very careful if you go this route as recent events have shown what can happen if you have an accident in a vehicle with dodgy brake components.

Offline thermidorthelobster

  • Posts: 3557
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • Referrals: 0
Re: Lr 101 6 Stud Brake Disc?
« Reply #3 on: February 20, 2009, 09:53:47 »
I fitted the Zeus kit to mine (front axle only, at that price - I left the original drums on the rear two axles).  Much angle grinding of the callipers was involved - Zeus seem to think this is perfectly acceptable.  The brakes themselves, once fitted, were fine - driving 5.5 tonnes up and down the Atlas mountains for days on end never resulted in any fade.  However I was very underwhelmed by Zeus themselves.  They told me the brakes would be fine with Unimog rims but I got some rubbing off the steering ball joint;  Zeus then told me that they'd never said they would be OK with Mog rims and got all arsey about it.  On that basis if there were an alternative to dealing with Zeus, I'd use it.
David French
Tree-hugging communist
1999 Discovery II TD5 Manual
Patriot roof rack, QT Services diff guards front & rear, DiscoParts steering guard[/url], Autologic ECU upgrade, 2" Old Man Emu lift, 235/85R16 BF Goodrich All Terrains, Safari snorkel, DiscoParts jackable sills, Warn Tabor 9000

Ex Disco 200TDI, P38a 4.6HSE and 101FC 6x6 Camper.  Africa Trip Blog

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal