Vehicle & Technical > Discovery

300Tdi fuel pump, something missing?

<< < (3/3)

biggerlandy:
if you look on back of the pump you will see a threaded bar bolt with a pressed steel collar on it that is the one some times if you loosen the lock nut on it and screw the it inwards it might turn a little if not you will have to remove the power screw complete. its just like a normal bolt but once it is out you will see the difference you have to remove the coller but before you do measure the distance from the nut to the end of bolt so you have a standard point removal of the coller is by gently twisting it of and eventually it will go put it back in pump and turn in the bolt in about 1 or 2 turns the tick over might come up but first go out and drive to make its happy ie smoke not to bad etc then to reduce tick over if needed is with threaded bar on top you will see throttle gear on top rest on it in closed poisition     good luck

boss:
how very extraudanry! :D

i may have misread then....

i will turn that bad bot around net time im over there!

Navigation

[0] Message Index

[*] Previous page