Fun, Friendly and Free
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Forum back online. Please post!
Home
Forum
Battle
Search
Login
Register
Mud-club
»
Vehicle & Technical
»
Discovery
»
panhard rod bushes
Print
Pages: [
1
]
Go Down
Author
Topic: panhard rod bushes (Read 1188 times)
0 Members and 1 Guest are viewing this topic.
alex_mh
Posts: 33
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
Referrals: 0
panhard rod bushes
«
on:
October 08, 2008, 20:00:21 »
i need to replace these for my mot, are they easy to get out and new ones in or do i need to use a press?
thanks
Logged
solihull-mick
Posts: 986
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
Referrals: 0
Re: panhard rod bushes
«
Reply #1 on:
October 08, 2008, 20:29:31 »
If there standard bushes they can be a pig to get out with out a press, you can burn them out, the standard bushes will go in with a good vice, poly bushes will go in fine with a vice,
Logged
300 TDI Commercial Disco, ( Recovery & Parts Hack )
Series 2A Hybrid TDI( Bessie)
Mk1 escort RS2000 (my baby)
MK6 Fiesta Zetec s (wife gets the brand new car)
peasey
Posts: 223
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
Referrals: 0
Re: panhard rod bushes
«
Reply #2 on:
October 08, 2008, 21:09:51 »
I have done mine recently,i found the best way was to drill out as much of the outer sleve as you dare without channeling out the panhard rod bush hole,i do this by starting with a smallish drill and working up and twisting the drill up and down gentley to cut the outer sleve,and then getting the biggest hammer you own and smashing seven shades of s**t out of it,have a real good argument with the mrs first and the will soon be out :D
Logged
HIT IT AND HIT IT HARD
Range Rover Blues
Moderator
Posts: 15218
Attack: 100
Defense: 100
Attack Member
Karma: +3/-0
South Yorkshire
Referrals: 0
Re: panhard rod bushes
«
Reply #3 on:
October 09, 2008, 01:03:10 »
It's one place where polybishes are a really good move. After 2 years mine were still in good nick, but for £4 each you can swap them as often as you like.
Logged
Blue, 1988 Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.
freeagent
Posts: 351
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
Referrals: 0
Re: panhard rod bushes
«
Reply #4 on:
October 09, 2008, 08:38:00 »
Burn them out and cut the outer sleeve with a hacksaw, you'll need to put 2 or 3 cuts in it... at this point it'll either fall out, or can be knocked out with a screwdriver/hammer...
i'd also replace with good quality polurethane bushes (polybush/bearmach/superpro)
Logged
1996 300Tdi 3-Door Discovery...
H/D Steering rods, Steering guards, diff guards, discoparts H/D rear bumper, rocksliders with tree bars, 245/75r16 General Grabber AT2's..
Disco-andy
Posts: 310
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
Referrals: 0
Re: panhard rod bushes
«
Reply #5 on:
October 15, 2008, 22:15:48 »
I used a hole saw to cut/drill the rubber out then hack saw through the outer sleave.
Logged
Disco-Ron
Posts: 1048
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
Referrals: 0
Re: panhard rod bushes
«
Reply #6 on:
October 15, 2008, 22:33:43 »
I used a big vice, and a large socket to allow the outer sleeve to slide into it, it started it moving, then i think i used a sleeve or another socket to push the outer out of the rod..... same/opposite operation to insert the new ones....
Logged
gone from 200tdi.... to 300tdi... still with loads done to it, in fact, even more than the last truck...LOL!!!
stuntman
Posts: 693
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
Referrals: 0
Re: panhard rod bushes
«
Reply #7 on:
October 16, 2008, 10:56:48 »
I've just done mine, literally last night.
It was one hell of a ball ache, I put the rod in a vice and set a burner at the right height and left it for half an hour, the bush was completely burnt out and the outer sleeve was then hammered and punched out byt bending the lip on o=both sides inwards.
Logged
1989 3.5slti Mazda powered 110DC
Erm ... I've lost my keys darling ... again!
clbarclay
Posts: 1615
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
Referrals: 0
Re: panhard rod bushes
«
Reply #8 on:
October 16, 2008, 12:54:40 »
If the rubber bush is shot then in my expeiance the the central metal tube wont take much pushing out (2 sockets and a vice) or alternatively drilling or hole sawing the rubber should suitably weaken the rubber enough.
Logged
Chris
Various range rovers from 1986 to 1988 in various states
Locost sports car based on mk2 escort - currently working on brakes, fuel and wiring
alex_mh
Posts: 33
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
Referrals: 0
Re: panhard rod bushes
«
Reply #9 on:
October 16, 2008, 21:23:51 »
mine was really easy to do, they knocked out easily with a 22mm socket, greased up the new ones and they slid in easily enough using the vce. only took 10 mins, love easy jobs like that!
Logged
Range Rover Blues
Moderator
Posts: 15218
Attack: 100
Defense: 100
Attack Member
Karma: +3/-0
South Yorkshire
Referrals: 0
Re: panhard rod bushes
«
Reply #10 on:
October 16, 2008, 23:52:45 »
I use Deflex on the panhard rod, they cost what £4 a pair? I swapped them after 2 years just to check theor condiditon and they were still mint, you can treat them like a service item at that price. BTW, the car handles much better ;)
Logged
Blue, 1988 Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.
Geoff30
Posts: 66
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
Referrals: 0
Re: panhard rod bushes
«
Reply #11 on:
October 18, 2008, 19:48:32 »
Don't poly bushes adversely affect the offroad handling????
Logged
Range Rover Blues
Moderator
Posts: 15218
Attack: 100
Defense: 100
Attack Member
Karma: +3/-0
South Yorkshire
Referrals: 0
Re: panhard rod bushes
«
Reply #12 on:
October 18, 2008, 20:47:38 »
NO, on the panhard rod they will make the steering a bit sharper. The only problem I can foresee is that they can exacerbate steering kickback.
Logged
Blue, 1988 Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.
Print
Pages: [
1
]
Go Up
Mud-club
»
Vehicle & Technical
»
Discovery
»
panhard rod bushes
SimplePortal 2.3.5 © 2008-2012, SimplePortal