AuthorTopic: Light bar  (Read 5588 times)

0 Members and 1 Guest are viewing this topic.

Offline Jeff J J

  • Posts: 93
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Light bar
« on: August 19, 2008, 17:05:32 »
The light bar is here  :)just need some good weather and patience with the wiring. I have 2 rectangle and 2 round lights to go up there. I will post some photos when its done. Jeff

1994 300Tdi 5 Door
Winch Bumper. Steering Guard. Bonnet Struts.Diff Guards. Rock Tree Sliders.
Checker Plate Rear Door Cover.2”lift.Camel Cut. Rear Work Light. 235/85/R16 on Black Zu Rims. Southdown Snorkel.Chequer Plating. Gulf Grill. Light Bar.
Wish list / Fuel Tank Guard. Winch. Side Exit Exhausts .Bucket Seat.

Offline muddymud

  • Posts: 229
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Light bar
« Reply #1 on: August 19, 2008, 17:41:39 »
Are you going to wire each spotlight up yourself or have you got a kit?

i got myself a kit, its quite expensive but they are very good and so easey to install just plug an play.
http://cgi.ebay.co.uk/Ring-Universal-Wiring-Kit-for-2-Pair-Spot-Lights-Lamps_W0QQitemZ130247977924QQcmdZViewItem?hash=item130247977924&_trkparms=72%3A1121%7C39%3A1%7C66%3A4%7C65%3A12%7C240%3A1318&_trksid=p3286.c0.m14

Cheers

Offline KingWolf

  • Posts: 883
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Spalding, Lincs
  • Referrals: 0
Re: Light bar
« Reply #2 on: August 19, 2008, 19:36:23 »
I wired mine for myself with all black wires to keep the installation nice and neat- makes for an interesting job but I'm quite handy with electrics... :lol: :lol: :lol:

Mine are wired to come on with main beam but I used the standard front fog light switch to isolate the circuit when I don;t need it as roof lights have a nasty habit of reflecting off the bonnet and windscreen...lol

Mark.

96' Discovery XS TDI with Muds, Lightbar, Snorkel, Guardian Tank Guard, Steering Guard, Wading Kit, Winch Bumper and Winch...!!!! Lift kit next..... :-)


Offline Jeff J J

  • Posts: 93
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Light bar
« Reply #3 on: August 19, 2008, 19:56:24 »
I am going to give the wiring a go my self should be a laugh. I now the next thing will be vinyl sticker or chequer plate for the bonnet but that’s for another time.
1994 300Tdi 5 Door
Winch Bumper. Steering Guard. Bonnet Struts.Diff Guards. Rock Tree Sliders.
Checker Plate Rear Door Cover.2”lift.Camel Cut. Rear Work Light. 235/85/R16 on Black Zu Rims. Southdown Snorkel.Chequer Plating. Gulf Grill. Light Bar.
Wish list / Fuel Tank Guard. Winch. Side Exit Exhausts .Bucket Seat.

Offline KingWolf

  • Posts: 883
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Spalding, Lincs
  • Referrals: 0
Re: Light bar
« Reply #4 on: August 19, 2008, 20:11:27 »
I'm sure you'll be fine mate, there not the hardest thing in the world to wore up - just take your time and you'll be fine. If you get stuck there are loads of people on here that will offer some help.

Mark.
96' Discovery XS TDI with Muds, Lightbar, Snorkel, Guardian Tank Guard, Steering Guard, Wading Kit, Winch Bumper and Winch...!!!! Lift kit next..... :-)


Offline Disco_Stu

  • Posts: 402
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Any chance of a tow...?
  • Referrals: 0
Re: Light bar
« Reply #5 on: August 19, 2008, 22:39:17 »
I've almost finished mine, been stealing the odd hour here and there to make up a wiring harness for the bar (4 spots), now thats done I've just got to wire my relay in and run the feed and earth up the snorkel, should be done by the weekend time permitting.

If you want any advice or pictures let me know, I'll put em all together in a thread when I get chance but you may need it sooner.

Used so far

1.5 reels of 27a red cable
1 reel of 17a black cable
1 meter of 8a red cable
1 meter of black 8a cable
4 brass bullet conectors
1 twin bullet connector terminal
1 30a fused relay
1 inline fuse
2 35a/10mm ring terminals

Got it all from motorworld or halfrauds. The price difference is staggering between the two shops...

This is just to wire them on with main beam. To wire a switch in also needs a few more bits.

I think I need a couple of 30a female spade terminals to wire the supply to and from the relay, I'm not happy using standard blue 15a ones on a circuit where everything else is rated at 30a plus.

There is a wiring diagram in this thred, it may help:

http://www.mud-club.com/forum/index.php/topic,61798.0.html


Good luck, Stu.
« Last Edit: August 19, 2008, 22:54:28 by Disco_Stu »
1994 300Tdi Disco    


Snorkel now complete.... http://forum.difflock.com/viewtopic.php?t=1906&highlight=



Offline bilge rat

  • Posts: 726
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Light bar
« Reply #6 on: August 20, 2008, 22:47:38 »
dont know weather its been mentioned about the glare off the bonnet but i made a couple of brows to fit to the underside of the lights. it does help . think the next step mabee the ctr part of the bonnet being blacked...alan

Offline Jeff J J

  • Posts: 93
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Light bar
« Reply #7 on: August 20, 2008, 23:30:05 »
Ok wired up all the lights to the bar checked that they work now just need to get the bar on the roof wire in the relay and switch. Jeff
1994 300Tdi 5 Door
Winch Bumper. Steering Guard. Bonnet Struts.Diff Guards. Rock Tree Sliders.
Checker Plate Rear Door Cover.2”lift.Camel Cut. Rear Work Light. 235/85/R16 on Black Zu Rims. Southdown Snorkel.Chequer Plating. Gulf Grill. Light Bar.
Wish list / Fuel Tank Guard. Winch. Side Exit Exhausts .Bucket Seat.

Offline Banjo

  • Posts: 96
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Light bar
« Reply #8 on: August 21, 2008, 09:01:59 »
I made a light bar yesterday, waited until it went dark,  then found out i have four new interior lights  :shocked:. How far back do they need to be, also are some lights worse than others ( for glare ).

Offline TechnoTurkey

  • Posts: 707
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Light bar
« Reply #9 on: August 21, 2008, 09:19:18 »
I'm going to spray the middle of my bonnet matt black as it needs a paint anyway, will leave the sides green though so it looks 'normal' from the side!

I'm just finishing wiring my bar up but the way I've done it means I cant get all the wires 'internal' to the bar so they are zip tied to the back in a bit of black ribbed trunking, should look ok but used thicker wires to handle some wattage upgrades in the future.
2007 Honda Civic Type R GT
1982 VW Camper - Current Project
1991 Pajero SWB 2.5TD - SOLD
1990 Range Rover Vouge 3.9 V8 - SCRAPPED
1989 110 3.5 V8 CSW - SOLD
1984 Series 3, Ex MoD, 109 SOLD
1986 90 2.5D Pick Up - SOLD

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: Light bar
« Reply #10 on: August 21, 2008, 17:51:02 »
If you want them super bright, fit HID :twisted:
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline Jeff J J

  • Posts: 93
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Light bar
« Reply #11 on: August 21, 2008, 19:45:44 »
Job very nearly done the bar is up the wiring is done even sorted the rear work light as the wiring gods where smiling on me :D . Wired them up to there own fuse box and switch on the dash under the clock. Just waiting for it to get dark then check the beams. Next job looks like matt blacking the raised part of the bonnet as there not many of you out there with roof lights that don't get the glare of the bonnet thinking of going done the paint route unless i can raise some funds for chequer plate.  Jeff
1994 300Tdi 5 Door
Winch Bumper. Steering Guard. Bonnet Struts.Diff Guards. Rock Tree Sliders.
Checker Plate Rear Door Cover.2”lift.Camel Cut. Rear Work Light. 235/85/R16 on Black Zu Rims. Southdown Snorkel.Chequer Plating. Gulf Grill. Light Bar.
Wish list / Fuel Tank Guard. Winch. Side Exit Exhausts .Bucket Seat.

Offline Disco_Stu

  • Posts: 402
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Any chance of a tow...?
  • Referrals: 0
Re: Light bar
« Reply #12 on: August 22, 2008, 00:02:28 »
Where are those switches from Jeff?
1994 300Tdi Disco    


Snorkel now complete.... http://forum.difflock.com/viewtopic.php?t=1906&highlight=



Offline Jeff J J

  • Posts: 93
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Light bar
« Reply #13 on: August 22, 2008, 14:32:07 »
Hi Stu got them from a Motor World car part shop near me you can get them in green and red £3.49 each. They fit nicely in the holes where the blank switches sit. Not tested the beam on the lights yet the Stella in the fridge as to tampting :). Jeff
1994 300Tdi 5 Door
Winch Bumper. Steering Guard. Bonnet Struts.Diff Guards. Rock Tree Sliders.
Checker Plate Rear Door Cover.2”lift.Camel Cut. Rear Work Light. 235/85/R16 on Black Zu Rims. Southdown Snorkel.Chequer Plating. Gulf Grill. Light Bar.
Wish list / Fuel Tank Guard. Winch. Side Exit Exhausts .Bucket Seat.

Offline Disco_Stu

  • Posts: 402
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Any chance of a tow...?
  • Referrals: 0
Re: Light bar
« Reply #14 on: August 28, 2008, 13:04:18 »
Cheers mate, got a motor world near me too, i'll nip down later and get some.

Mines finished by the way, no disasters, all wired up and happy :)

Stu.
1994 300Tdi Disco    


Snorkel now complete.... http://forum.difflock.com/viewtopic.php?t=1906&highlight=



Offline Disco Matt

  • Posts: 2666
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • Referrals: 0
Re: Light bar
« Reply #15 on: August 28, 2008, 13:33:54 »
You can buy the proper LR front foglight switches cheaply enough on ebay. They do need a special connector but mine already had one as part of pre-installed front foglight wiring, so I just rewired it to switch the relay for the spots.
1996 Discovery 300TDI. She's got it where it counts...

Offline Jeff J J

  • Posts: 93
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Light bar
« Reply #16 on: August 28, 2008, 20:32:41 »
I thought about going down the landrover front fog light switch but the hole playing with the wires at the back of the switch just put me of to many dramas for this call sign.
1994 300Tdi 5 Door
Winch Bumper. Steering Guard. Bonnet Struts.Diff Guards. Rock Tree Sliders.
Checker Plate Rear Door Cover.2”lift.Camel Cut. Rear Work Light. 235/85/R16 on Black Zu Rims. Southdown Snorkel.Chequer Plating. Gulf Grill. Light Bar.
Wish list / Fuel Tank Guard. Winch. Side Exit Exhausts .Bucket Seat.

Offline Disco Matt

  • Posts: 2666
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • Referrals: 0
Re: Light bar
« Reply #17 on: August 28, 2008, 21:27:24 »
They're really simple to trace - mine had a white wire that didn't go anywhere (just looped through a bulkhead grommet), an earth, and two feeds from the sidelights. One of these was to allow the switch to make the white wire live, the other powers the illumination on the switch. I just connected the right one to the full beam feed, and the white wire to the spotlight relay.

I can go and check which was which if you want - it's in the RAVE manual though. The wire colours were wrong but the pinout for the plug was correct.
1996 Discovery 300TDI. She's got it where it counts...

Offline sMUDge

  • Posts: 338
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Light bar
« Reply #18 on: August 29, 2008, 08:05:23 »
I am going to give the wiring a go my self should be a laugh. I now the next thing will be vinyl sticker or chequer plate for the bonnet but that’s for another time.


Has anyone seen this for sale?  As I'm after some black chequer plate for my bonnet too!  (I stand on it quite a lot & the glare from my lights is a pain in the . . . . !!)
Disco Ser 2 V8

Handle every situation like my dog does, if you can't eat it or hump it, wee on it and walk away......

Offline TEMPER593

  • Posts: 126
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Light bar
« Reply #19 on: August 29, 2008, 13:24:42 »
Hi all.

I dont know what u'll think about it but as i was strapped for cash i made my light bar from the cross bar on the standered disco roof bars.
Im making some brackets that fit to the top of the bar form round the roof bars then back under and bolts though the bar to stop folk from nickin um.

There only 55watters but there bright enough and u dont get the glare on the window and bonnet. :)

So what u all think then?   [-o<
Will it fit though there? Dont know but we'll soon find out.............................opps!!!!

Offline Disco_Stu

  • Posts: 402
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Any chance of a tow...?
  • Referrals: 0
Re: Light bar
« Reply #20 on: August 29, 2008, 21:26:53 »
Good idea, seen it on some other discos and it looks alright. I've no roof bars on mine so no good for me but yours sounds good, any pics?
1994 300Tdi Disco    


Snorkel now complete.... http://forum.difflock.com/viewtopic.php?t=1906&highlight=



Offline TEMPER593

  • Posts: 126
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Light bar
« Reply #21 on: August 30, 2008, 06:04:38 »
I will try to put some up trouble is i understand computers like i understand women so u might have to wait a while! :D
Will it fit though there? Dont know but we'll soon find out.............................opps!!!!

Offline Jeff J J

  • Posts: 93
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Light bar
« Reply #22 on: August 30, 2008, 16:50:17 »
Sounds like a plan would like to see it.
1994 300Tdi 5 Door
Winch Bumper. Steering Guard. Bonnet Struts.Diff Guards. Rock Tree Sliders.
Checker Plate Rear Door Cover.2”lift.Camel Cut. Rear Work Light. 235/85/R16 on Black Zu Rims. Southdown Snorkel.Chequer Plating. Gulf Grill. Light Bar.
Wish list / Fuel Tank Guard. Winch. Side Exit Exhausts .Bucket Seat.

Offline TEMPER593

  • Posts: 126
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Light bar
« Reply #23 on: September 18, 2008, 09:42:42 »
Sorry Jeff put for some reason it wont let me put a picture up.

Put as u can see from me new profile pic there up and running with no reflection on the bonnet. :)
Will it fit though there? Dont know but we'll soon find out.............................opps!!!!

Offline Jeff J J

  • Posts: 93
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Light bar
« Reply #24 on: October 04, 2008, 21:23:42 »
Ok hunted round the house for stuff to sell to riase funds for the Chequer Plate Bonnet Cover. Tracked one done on ebay £60.00 extra £20 for matt black powder coat all up plus postage £93.00 got here thursday fitted today very happy. Jeff
1994 300Tdi 5 Door
Winch Bumper. Steering Guard. Bonnet Struts.Diff Guards. Rock Tree Sliders.
Checker Plate Rear Door Cover.2”lift.Camel Cut. Rear Work Light. 235/85/R16 on Black Zu Rims. Southdown Snorkel.Chequer Plating. Gulf Grill. Light Bar.
Wish list / Fuel Tank Guard. Winch. Side Exit Exhausts .Bucket Seat.

Offline Disco_Stu

  • Posts: 402
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Any chance of a tow...?
  • Referrals: 0
Re: Light bar
« Reply #25 on: October 04, 2008, 21:42:54 »
Looks good fella. Now put some lashing points on it, string it with bungee cord and you've got somwhere to throw the tow rope between pulls :)
1994 300Tdi Disco    


Snorkel now complete.... http://forum.difflock.com/viewtopic.php?t=1906&highlight=



mentalmoshio sophs V8i

  • Guest
Re: Light bar
« Reply #26 on: October 04, 2008, 21:59:24 »
damm know thats put me off a carbon piece for mine and checker plate instead  :->

Offline Disco_Stu

  • Posts: 402
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Any chance of a tow...?
  • Referrals: 0
Re: Light bar
« Reply #27 on: October 05, 2008, 12:44:42 »
Did you get that protector of jumblerat? I've been looking at his stuff myself.

Anyone know where to get chequer plate rear quarter protectors from? I did see them on ebay a while back.I had a disagreement with a wall on the way to Gategarth pass in the lakes on saturday, I may cover up my dent!

Stu.
1994 300Tdi Disco    


Snorkel now complete.... http://forum.difflock.com/viewtopic.php?t=1906&highlight=



Offline Jeff J J

  • Posts: 93
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Light bar
« Reply #28 on: October 05, 2008, 14:20:22 »
Yes the Cover came from jumblerat very happy with it ignore the part in there listing on eBay about the bump at the back if you pop rivet it properly you don't get one  :D. I think there where chequer plate rear quarter protectors on there page last time i looked give them an email see what they say.
Jeff
1994 300Tdi 5 Door
Winch Bumper. Steering Guard. Bonnet Struts.Diff Guards. Rock Tree Sliders.
Checker Plate Rear Door Cover.2”lift.Camel Cut. Rear Work Light. 235/85/R16 on Black Zu Rims. Southdown Snorkel.Chequer Plating. Gulf Grill. Light Bar.
Wish list / Fuel Tank Guard. Winch. Side Exit Exhausts .Bucket Seat.

Offline crazymac

  • Posts: 1891
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Light bar
« Reply #29 on: October 05, 2008, 20:44:28 »
You may find some rear quarters here?

http://www.rebel4x4.co.uk/discovery_range.htm
I HAVE THE BODY OF A GOD

shame its Budda!!

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal