Topic: Rear recovery points, lack off (Read 487 times)

bambamjj · « **on:** July 16, 2008, 12:42:17 »

Hello all

Is it possible to use the mounting points in the rear cross member for attaching recovery points?

usual Lower down attachment area is US...... at the moment..... to lazy to fix etc. etc. etc. :oops:

mentalmoshio sophs V8i · « **Reply #1 on:** July 17, 2008, 18:56:57 »

i would say yes u can . think ive seen towbars on there b4 now. or m12 bolts with hook ring recovery point. make sure its solid under there :lol:

bambamjj · « **Reply #2 on:** July 17, 2008, 19:58:20 »

Thanks, Not doubting you but can anyone else confirm/

I will probably use 5 or 10mm plate on both sides of cross member then mount recovery ring on this. Nato hitch would be nice 8-[

crazymac · « **Reply #3 on:** July 17, 2008, 20:10:41 »

If you mean the two points marked in my photo, then yes, no problem. I've seen 2 Jate rings put through these holes and used for recovery.

bambamjj · « **Reply #4 on:** July 17, 2008, 20:37:58 »

Thats the ones!

Cheers Crazymac

J.D. · « **Reply #5 on:** July 20, 2008, 09:59:46 »

I made up a u - shaped piece of 8mm steel and mounted a swivel shackle on the bottom of the u and the two sides ar ebolted top and bottom to the rear crossmember inside the rear bumper.

News:

AuthorTopic: Rear recovery points, lack off (Read 487 times)

bambamjj

Rear recovery points, lack off

mentalmoshio sophs V8i

Re: Rear recovery points, lack off

bambamjj

Re: Rear recovery points, lack off

crazymac

Re: Rear recovery points, lack off

bambamjj

Re: Rear recovery points, lack off

J.D.

Re: Rear recovery points, lack off