Chat & Social > The Bar - General Chat
waffle boards
redhand:
--- Quote from: muddyweb on July 14, 2008, 22:22:28 ---
--- Quote from: redhand on July 14, 2008, 22:19:15 ---Ok so certain suppliers get there waffle boards tarted up as bit. but they have the same breaking strains and load bearing capabilties, as floor gratings.
--- End quote ---
Please share with the group..... Please show us the figures for load bearing, deflection and ultimate breaking strength for floor grating and for our waffles. Your turn to come up with some proof.
--- End quote ---
I've already asked you for load bearing and stress data for your products and you declined to provide them. Because you know as well as I do that they will be identical to the figures supplied by the flooring grid manufacturers
muddyweb:
--- Quote from: redhand on July 16, 2008, 23:22:33 ---I've already asked you for load bearing and stress data for your products and you declined to provide them. Because you know as well as I do that they will be identical to the figures supplied by the flooring grid manufacturers
--- End quote ---
They aren't... I know that. But I'm not the one making allegations here... so, come up with something to back your claim, or just admit that your posts are based on your opinion rather than any sort of fact.
Jake:
Blimey, this is still going on :roll:
I take it you didn't bother to come over and have a look at our waffles then :-.
Why not?
:?
redhand:
--- Quote from: Jake on July 21, 2008, 21:04:31 ---Blimey, this is still going on :roll:
I take it you didn't bother to come over and have a look at our waffles then :-.
Why not?
:?
--- End quote ---
Mainly because I was in Hull, working.
clbarclay:
I was a billing and had a looking at some waffles on the devon stand (a pile of waffles at the edge of the tent near the super sized mach 5)
Now just to set this straight, I am not saying that d44 waffles are or are not off cuts. However I was left with some questions having looked at the waffles on you stand, and having more pressing issues to deal with at the show, I didn't bother asking about them there.
--- Quote ---Since you are going to be at Billing, just wander over to our stand, (you don't even need to speak to anyone so we won't try and influence you or sell you any), and look with your own eyes at the waffles. They are different to the floor grating offcuts... they have sealed edges....
--- End quote ---
What exactly do you mean by sealed edges? all the waffles I saw on your stand had the distinct raised and ground down markings a long one edge the same as other suppliers waffles I saw at the show, though ground a lot neater than some others.
Were these your propper waffles?
If they were molded to shape in a dedicate mould, why are there what apperared to be "off cut" markings?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version