Topic: disco redesign (Read 47264 times)

boss · « **Reply #150 on:** July 22, 2008, 08:31:53 »

Quote from: Jake on July 21, 2008, 20:39:07

Stickers look great Steve ;)
Nice to met you btw
Quote from: boss on July 21, 2008, 08:30:23
hahaha when did you get a chance to haras him? went to the devon tent a few times to talk to tim and jake but they were all busy!
I was expecting you too Doug
You should've pushed in and said hi :lol:
:D

should have but diddnt :( maby a bit late for this jake but how much were those double cardon props on the devon stand?

Jake · « **Reply #151 on:** July 22, 2008, 21:45:18 »

Quote from: boss on July 22, 2008, 08:31:53

should have but diddnt :( maby a bit late for this jake but how much were those double cardon props on the devon stand?

iirc around Â£250 for the full monty competition versions
:D

boss · « **Reply #152 on:** July 23, 2008, 09:25:50 »

ok, thanks buddy trolling through the devon 4x4 site and found this!

hungry?

boss · « **Reply #153 on:** July 23, 2008, 09:38:31 »

also jake i have just read on the devon website that you are making a "cheap" challange truck with [!Expletive Deleted!] all money! you want me to see if i got anything that may be of use???

mentalmoshio sophs V8i · « **Reply #154 on:** July 25, 2008, 19:51:55 »

tank gaurd or ( heat sheild ) was making great progress tonite untill the welder broke :evil one bit bolts to the back of the towbar and main bit goes to the chassais drop bracket.

Jake · « **Reply #155 on:** July 25, 2008, 20:47:37 »

Quote from: boss

Hungry?

Thats one of my favourite things about the shows
proper breakfast every morning ;)

Quote from: boss

also jake i have just read on the devon website that you are making a "cheap" challange truck with [!Expletive Deleted!] all money! you want me to see if i got anything that may be of use???

Looking around i think we have everything we need cheers Doug
We have a 300tdi plus R380 and 1.6 transfer box, roll cage, 8274 with xp motor, competition bumper and steering guard, suspension, 5 simex tyres, a truck cab roof and series doors all lying about at work :dance:
The joys of working in the trade mate :twisted:
We start working on it next week
Pictures to follow on the d44 forum

clbarclay · « **Reply #156 on:** July 25, 2008, 23:11:33 »

Jake, would you care to define "cheap", if all the parts are bough new at normal price what is the expected budget?

Jake · « **Reply #157 on:** July 26, 2008, 10:53:57 »

Quote from: clbarclay on July 25, 2008, 23:11:33

Jake, would you care to define "cheap", if all the parts are bough new at normal price what is the expected budget?

There is no set budget as such
The brief is to build a "pool" car for the staff to use as they see fit, to be classed as a standard car (open diffs, 1 winch) and to not cost the earth to create.
The base car (LR 90) cost Â£250.
The roll cage, winch, bumper, HD rear cross member, truck cab top are all take offs from Simons 90 (which is having a major makeover. The 300 tdi and box have come from a Disco we brought which was a scrapper. The transfer box we've had lying around for a while. The simex tyres are part worn take offs (again from Simons truck).
So its not costing a lot to make
The workshop time will be free because most of it will be out of hours and every one working on it will be using it from tome to time.
I guess the it will cost around Â£2000 to complete, which in challenge terms is very little money
:D

boss · « **Reply #158 on:** July 26, 2008, 11:49:04 »

you jammy [!Expletive Deleted!]! if ther eis another winch "laying" around can you give me a shout? i need one to get started(will pay :lol:)

mentalmoshio sophs V8i · « **Reply #159 on:** July 27, 2008, 17:25:02 »

clear repeaters now on used led orange bulbs.

now im toying with the idea of smoked headlights ( not sure if there road legal) with td5 pre 03 front indictors clear ones maybe . :-k

most of the cooling system was cleaned resulting in alot cooling running so far

oh one quick question when u blimp the throttle on the pleum chamber should the whole car move up and down 4 inch roughly

Disco Matt · « **Reply #160 on:** July 27, 2008, 17:56:31 »

Mine rocks slightly when you blip the pedal due to the torque, not noticed any upward movement though.

Powerful single-prop aircraft have a similar problem - the plane wants to spin in the opposite direction to the prop!

mentalmoshio sophs V8i · « **Reply #161 on:** July 30, 2008, 21:21:43 »

ebay stereo spacer in ( have to say for 13 quid im a little fd off flismy and not excactly pretty ) any way heres the pics . i may blend it into the cubby console some time when it goes matt black . ive already added 18mm each side to improve the fit some what

mentalmoshio sophs V8i · « **Reply #162 on:** August 03, 2008, 18:33:13 »

finally got around to fitting extended bumpstops 3 yrs later 8-[ . i used the backing plate of the orginal ones for extra strength .

mentalmoshio sophs V8i · « **Reply #163 on:** August 03, 2008, 18:46:10 »

extended roofrack on now too :shock:

boss · « **Reply #164 on:** August 04, 2008, 16:16:55 »

....so have you been running it with out bumpstops? :-k

mentalmoshio sophs V8i · « **Reply #165 on:** August 04, 2008, 19:02:33 »

Quote from: boss on August 04, 2008, 16:16:55

....so have you been running it with out bumpstops? :-k

standard ones boss didnt even lower them :doh:

boss · « **Reply #166 on:** August 04, 2008, 19:35:26 »

..........nither have i! :lol:
infact mine arnt even on at the moment! :shock:

mentalmoshio sophs V8i · « **Reply #167 on:** August 28, 2008, 00:12:06 »

well this what it sounds like without the tweek to it yet :drool: oh mic is a little worst for wear on phone

whats going on, well a straight through system to twin big bores

mentalmoshio sophs V8i · « **Reply #168 on:** August 28, 2008, 00:45:30 »

aftermarket steering wheel, gaitors going on at the weekend hopefully, oh added this a few days ago

peasey · « **Reply #169 on:** August 29, 2008, 22:43:07 »

Looks to me like you need to adjust that hand brake my man. :D

mentalmoshio sophs V8i · « **Reply #170 on:** August 30, 2008, 19:42:03 »

well its not the finished one , stilll in pieces along with tank gaurd :roll:

but it will do for now .

straight through middle pipe on to 4 inch cherrybomb turnt loader ways on.

http://www.youtube.com/watch?v=oo5Tf5VOlUM

boss · « **Reply #171 on:** August 31, 2008, 14:11:45 »

cant wait untill i see a post on here saying " my back box got ripped off" :lol:

mentalmoshio sophs V8i · « **Reply #172 on:** August 31, 2008, 15:15:03 »

well ur kinda rite in a way boss. the previous middle box got bent by massive back pressure going to work 3 weeks ago . still here the close attempt so for

mentalmoshio sophs V8i · « **Reply #173 on:** August 31, 2008, 17:48:28 »

change abit last nite colourwise

the final one once finish is gonna be mounted 4 inchs higher up and half cut into the bumper . this may require some cutting and heat protection maybe

boss · « **Reply #174 on:** August 31, 2008, 21:59:06 »

steve, if that were me i would fit a side exit....and if mine was a v8 i would have one pipe coming out each side!
IMO fitting a big back box after nearley ripping one off is an act of stupidity! or am i missing something here? :-k

mentalmoshio sophs V8i · « **Reply #175 on:** August 31, 2008, 22:09:54 »

Quote from: boss on August 31, 2008, 21:59:06

steve, if that were me i would fit a side exit....and if mine was a v8 i would have one pipe coming out each side!
IMO fitting a big back box after nearley ripping one off is an act of stupidity! or am i missing something here? :-k

weld it on stronger and test it hard i say :D

most of the mounts are 1 inch thick box section with m10 bolts throught it. damm standard didnt last 5 minutes with me haha :lol: :lol: :lol: or if that fails do this kinda off

mentalmoshio sophs V8i · « **Reply #176 on:** August 31, 2008, 22:14:25 »

besides dont camel 110 have exhuast guards on on the back

mentalmoshio sophs V8i · « **Reply #177 on:** September 21, 2008, 12:24:56 »

after another fight with the steering wheel ,im still no further foward. so my attention went to m.o.t time area ,i.e rust area

both the front wing need welding up , started by waxoyling the chassais for a start

wrecker · « **Reply #178 on:** September 22, 2008, 18:37:30 »

how birght are your lights mate,

have you been stoped for it,carnt be legal can it

mentalmoshio sophs V8i · « **Reply #179 on:** September 22, 2008, 19:55:01 »

had them on there about 4 months now and had no problems with the laws so far . l.e.d is a simple fix . just waitting on a small lottery win to get mine

News:

AuthorTopic: disco redesign (Read 47264 times)

mentalmoshio sophs V8i

mentalmoshio sophs V8i

mentalmoshio sophs V8i

mentalmoshio sophs V8i

mentalmoshio sophs V8i

mentalmoshio sophs V8i

mentalmoshio sophs V8i

mentalmoshio sophs V8i

mentalmoshio sophs V8i

mentalmoshio sophs V8i

mentalmoshio sophs V8i

mentalmoshio sophs V8i

mentalmoshio sophs V8i

mentalmoshio sophs V8i

wrecker

mentalmoshio sophs V8i