Vehicle & Technical > Discovery

A Frame problem

<< < (3/5) > >>

Wolfie:

--- Quote from: Big Rich on February 05, 2008, 20:28:16 ---
--- Quote from: Range Rover Blues on February 05, 2008, 19:54:30 ---It's possible that later chassis (the round crossmember type) might have the bracket welded on, if this is the case sorry for the confusion.

--- End quote ---

 :? Sorry its not had to confuse me  :?

Unfortunatly mine is the round cross member.  :doh:

Rich

--- End quote ---

Are you certain you haven't got the brackets that RRB and I are talking about, they are the ones numbered  575615 and 575616 on this page http://www.connectstores.com/lr/sp_35906.html

They are also shown, but not numbered on the Discovery parts page at http://www.connectstores.com/lr/sp_35257.html

And as far as I can tell, they're not listed anywhere as being only applicable to a certain range of chassis numbers eg http://www.beamends-lrspares.co.uk/BeamEnds/DiscoveryI/Suspension/RearAFrame/index.html

Big Rich:
You have me thinking now. Will have a look in the morning. If so I'll whip it off.

Thanks

Rich

Big Rich:
Had a look and mine is the tube tipe welded on  :cry:

Tryed heat but for some reason no joy?

Rich

Range Rover Blues:
DREMEL cuts ;)

Big Rich:
Thanks Range Rover Blues. I will give that a go in the morning. Never been beaten like this before and I rebuilt my 1969 2b forward control.

Rich

Navigation

[0] Message Index

[#] Next page

[*] Previous page