Vehicle & Technical > Suzuki
jimny leans on drivers side with pro comp kit???
markyb:
not sure if it helps but, all the lift lits ive bought were sided
when i got my 110 lift kit the springs were all marked and all different lengths, i scratched my head thinking WFT
put it in the right corners it stated and it sits right, i was amazed, i know WIlls old jimny sat fine, he had a combination of all sorts of spacers etc
i should have made a note of which longer one went where as i suspect you could compenstate with spacers on the right sides
jims jimny:
mine also cured it by putting in a spring spacer
glaggs:
Yep mines a pro comp kit, but I swapped the springs to Old Man emu's which are slightly stiffer? I think but not as wide in the middle. This was mainly because the pro comp spring would rub on the chassis on hard cornering. The emu springs gave a slight improvement over pro comp for the lean problem.
My current set up is, old man Emu +40mm springs on front (pro comp +50 on rear) Fronts are sided, theres about 15mm difference. As I have a winch fitted to the front and two batteries under the bonnet I also run a pair of 50mm spring spacers (from bits for vits - very good service) which bring everything back up to where it was before fitting a winch. I have then cut the ends off two of the original sprins so that I have just over one complete turn. One off these is placed on top of the drivers side OME spring and one on the bottom, giving another 20mm. This brings things approximately back in line. Finaly I've extended the bump stops on the axel by approx 30mm to stop the springs becoming coil bound and to try and stop the tyres catching on the inner wings - I'm running 31" Kuhmo's and this is the main reason for the extended bump stops. If they don't work I've a Bits for Vits 2" body lift kit waiting to go on. But if poss I'd rather not fit it as currently the Jimny is more stable than std both on and off road. All of these mods are work in progress and are the result of 4 years evolution.
mlines:
Wills old Jimny - which is now mine :) has got a Bits4Vits style spacer on the drivers side to level it out.
Martin
www.bigjimnycom
jamesey:
nice one ill have to mess with it this weekend , cheers guys :lol:
Navigation
[0] Message Index
[*] Previous page
Go to full version