Vehicle & Technical > Suzuki

jimny leans on drivers side with pro comp kit???

(1/2) > >>

jamesey:
i lifted my jimny and yes i have put the springs on the correct axel ,
now ive been running it for a while it seems to be leaning towards the drivers side , i have measured from the bottom of the arch on the rear to the top of my colways and the drivers side is 5 " then the passengers side is 6 1/2 "  and thats parked on level ground
now a guy from amour suzuki (suzuki rubbers they were called) said if its ao comp ive fitted it will lean after a while
has anyone else had this problem with a pro comp 2" lift kit and how did you sort it
 :cry:

glaggs:
They all do that sir! Quite a few threads on here http://www.jimny.se/ about this, even with std suspension. Mine does it, I compesate as best I can using a spacer made from the old suzuki spring. If the bolts attaching your radius arm to the body are seized in the bush it doesn't help either. Unfortunately its one of those anoying problems that no one seems to have solved (as far as I know -prove me wrong please guys)

jamesey:
do you have the pro comp kit glaggs :)
how did you compensate exactly    explorer just said to me take my springs off and send them back for testing

larry:
My sammy did the same get a fat passenger hehehe

generation-x:
ive known a few jimny owners with the same problem its been cured buy using coil spacers on the offending side bits4vits sell coil spacers in pairs if its any help

simon :wink:

Navigation

[0] Message Index

[#] Next page