Pages: [1]   Go Down

AuthorTopic: fitting a winch  (Read 3524 times)

0 Members and 1 Guest are viewing this topic.

Offline 4x4spud

  • Posts: 69
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
fitting a winch
« on: December 05, 2007, 20:51:35 »
i have just purchased a champion winch of eblag just like the one in this link http://cgi.ebay.co.uk/Recovery-Winch-12000Lbs-by-Extreme-Terrain_W0QQitemZ290188558768QQihZ019QQcategoryZ36632QQtcZphotoQQcmdZViewItem

i have got a guardian bumper coming when i order it later on tonight

is there anything i need to order or get  in that i will need to install the winch in to a defender with air con and is there any thing to look out for i.e. pitfalls or any advice please thanks
Logged
fail to prepare.. prepare to fail!



If it dont fit...force it. If ya cant force it...get a bigger hammer. If it breaks...it probably needed replacing anyway.

my rides
90 td5 h/top
tsx 350 honda quad
c125 husqvarna ride on
a builders wheel barrow
the wife

Offline Saffy

  • Posts: 3127
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
    • The Bell Inn, Imber.
  • Referrals: 0
Re: fitting a winch
« Reply #1 on: December 05, 2007, 21:00:55 »
Quote from: "4x4spud"
i have just purchased a champion winch of eblag just like the one in this link http://cgi.ebay.co.uk/Recovery-Winch-12000Lbs-by-Extreme-Terrain_W0QQitemZ290188558768QQihZ019QQcategoryZ36632QQtcZphotoQQcmdZViewItem

i have got a guardian bumper coming when i order it later on tonight

is there anything i need to order or get  in that i will need to install the winch in to a defender with air con and is there any thing to look out for i.e. pitfalls or any advice please thanks


Is the bumper specifically for an aircon model installation else the winch will probably foul the front panel.
Logged
.swonk eno oN .esoht dna eseht ,siht dna taht ,wollof ot selur emos teg eW

Offline jimthelandyman

  • Posts: 447
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
fitting a winch
« Reply #2 on: December 05, 2007, 21:05:17 »
you might need extended cables to reach your battery don't order them online for £40 i got some battery cable from the local motor factor for about £10
Logged

Offline 4x4spud

  • Posts: 69
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
fitting a winch
« Reply #3 on: December 05, 2007, 21:06:35 »
i will order a bumper suitable for air con

do i need to but a mounting plate for the winch to sit in
Logged
fail to prepare.. prepare to fail!



If it dont fit...force it. If ya cant force it...get a bigger hammer. If it breaks...it probably needed replacing anyway.

my rides
90 td5 h/top
tsx 350 honda quad
c125 husqvarna ride on
a builders wheel barrow
the wife

Offline 4x4spud

  • Posts: 69
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
fitting a winch
« Reply #4 on: December 05, 2007, 21:16:03 »
if i need extended cable swhich i think i will how or where do you join them or even better has any body got advice on a wiring diagram also best way to route the wiring thanks
Logged
fail to prepare.. prepare to fail!



If it dont fit...force it. If ya cant force it...get a bigger hammer. If it breaks...it probably needed replacing anyway.

my rides
90 td5 h/top
tsx 350 honda quad
c125 husqvarna ride on
a builders wheel barrow
the wife

Guardian.

  • Guest
fitting a winch
« Reply #5 on: December 05, 2007, 21:23:18 »
THAT WINCH BOLTS STRAIGHT INTO THE BUMPER , AND THAT BOLTS STRAIGHT ONTO YOUR DEFENDER, NO SWEAT.
LIKE THE BOYZ SAID, YOU WILL NEED SOME EXTENSION LEADS FOR YOUR BATTERY.
I HAVE SOME OF THIS, I DONT SELL IT, BUT HAVE QUITE A BIT SITTING ABOUT THAT YOU CAN HAVE CHEAP DONT WORRY ABOUT THAT, YOU WILL JUST NEED THE RELEVANT TERMINALS AS I DONT HAVE ANY ANYMORE.
CHEERS
SPENCE
Logged

Offline 4x4spud

  • Posts: 69
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
fitting a winch
« Reply #6 on: December 05, 2007, 21:59:57 »
pmed guardian cheers
Logged
fail to prepare.. prepare to fail!



If it dont fit...force it. If ya cant force it...get a bigger hammer. If it breaks...it probably needed replacing anyway.

my rides
90 td5 h/top
tsx 350 honda quad
c125 husqvarna ride on
a builders wheel barrow
the wife

Offline land-def-90

  • Posts: 173
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
fitting a winch
« Reply #7 on: December 06, 2007, 20:28:14 »
best to fit a cut off switch on live feed to winch, mine is at front of battery box so can be operated from driving seat
Logged

Offline Jimbo

  • Posts: 1126
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
fitting a winch
« Reply #8 on: December 06, 2007, 23:34:48 »
You'll also need to eat 3 shredded wheat before you attempt the fitting of the bumper and winch.............or get a mate to help, believe me - it hurts when you drop a winch bumper on your foot when trying to fit it single-handedly  :evil:
Logged
Jim

TDV6 HSE D3
Defender 110 Td5 Hard top, BFG MT's, and no EGR either

http://www.hertfordshire4x4response.net

Offline Saffy

  • Posts: 3127
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
    • The Bell Inn, Imber.
  • Referrals: 0
fitting a winch
« Reply #9 on: December 07, 2007, 07:42:37 »
Quote from: "Jimbo"
You'll also need to eat 3 shredded wheat before you attempt the fitting of the bumper and winch.............or get a mate to help, believe me - it hurts when you drop a winch bumper on your foot when trying to fit it single-handedly  :evil:

Having no handy m8's I had to use two trolley jacks. They worked well and drank less tea.
Logged
.swonk eno oN .esoht dna eseht ,siht dna taht ,wollof ot selur emos teg eW

Offline kevinf

  • Posts: 192
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
post subject
« Reply #10 on: December 07, 2007, 09:20:50 »
i would also suggest fitting a small warning buzzer along with the isolator switch,just pick the live up from the output side of the switch and earth the negative to the battery negative,that way you never leave the isolator switched on







cheers kevin
Logged
the shinny blue defender with the winch,checker plate body protection,extra seating and windows
and at this point I noticed the n/s air vent wasnt fully closed so lets not forget the mud stained interior and the water logged kenwood 6disc cd

Offline Mutz

  • Posts: 733
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Norwich, Norfolk.
    • Norwich
  • Referrals: 0
fitting a winch
« Reply #11 on: December 07, 2007, 17:22:53 »
Think you will also need a decent digital camera!!!

So you can show us all in stages how you did it so I dont have to ask again in a few months :lol:
Logged
1995 300tdi 90 rebuilt and on the road (but still a project)
1992 Pajero SWB 2.5 Auto (failed its MOT and for sale if you want it)

"I Havn't got a Bad Attitude; you just can't handle my personality"

Offline 4x4spud

  • Posts: 69
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
fitting a winch
« Reply #12 on: December 07, 2007, 19:40:42 »
fancy giving me a hand mutz possibly in the new year when bumper arrives
Logged
fail to prepare.. prepare to fail!



If it dont fit...force it. If ya cant force it...get a bigger hammer. If it breaks...it probably needed replacing anyway.

my rides
90 td5 h/top
tsx 350 honda quad
c125 husqvarna ride on
a builders wheel barrow
the wife

Offline Mutz

  • Posts: 733
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Norwich, Norfolk.
    • Norwich
  • Referrals: 0
fitting a winch
« Reply #13 on: December 07, 2007, 21:57:29 »
Give us a call in the new year, will see how far im getting with striping my 90.
Logged
1995 300tdi 90 rebuilt and on the road (but still a project)
1992 Pajero SWB 2.5 Auto (failed its MOT and for sale if you want it)

"I Havn't got a Bad Attitude; you just can't handle my personality"

Offline richo

  • Posts: 452
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
fitting a winch
« Reply #14 on: December 08, 2007, 16:06:17 »
Let us know how you get on when it's fitted as i'm also thinking about getting the guardian winch bumper and champ winch for my 110.
Logged
Jesus was a carpenter but god was a plasterer.

Offline 4x4spud

  • Posts: 69
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
fitting a winch
« Reply #15 on: December 08, 2007, 17:45:28 »
cant beat guardian on service so far i will get the winch bumper after xmas i hope not before

the winch is here on monday i will give a quick review if you like

i have looked a various winch bumpers over the last 6 months and guardian looks as if they will take some beating

also the main guardian man is a poster on the forum

so cant be bad  :D  :D  :D
Logged
fail to prepare.. prepare to fail!



If it dont fit...force it. If ya cant force it...get a bigger hammer. If it breaks...it probably needed replacing anyway.

my rides
90 td5 h/top
tsx 350 honda quad
c125 husqvarna ride on
a builders wheel barrow
the wife

Offline richo

  • Posts: 452
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
fitting a winch
« Reply #16 on: December 08, 2007, 21:33:02 »
I know what you mean ,think he lives not far from me so i might pick one up in the new year.
Have been told that the champ winch is a good un apart from the solenoids they use are cheap .Have been told when that breaks to fit another make ,can't think of the name at the moment though.
Make sure you post some pics when its fitted so i can ave a look.
Logged
Jesus was a carpenter but god was a plasterer.

Offline Ja1983

  • Posts: 1082
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • This week I have mostly been fixing....
  • Referrals: 0
Re: fitting a winch
« Reply #17 on: December 09, 2007, 00:22:03 »
Quote from: "4x4spud"
i have just purchased a champion winch of eblag just like the one in this link http://cgi.ebay.co.uk/Recovery-Winch-12000Lbs-by-Extreme-Terrain_W0QQitemZ290188558768QQihZ019QQcategoryZ36632QQtcZphotoQQcmdZViewItem

i have got a guardian bumper coming when i order it later on tonight

is there anything i need to order or get  in that i will need to install the winch in to a defender with air con and is there any thing to look out for i.e. pitfalls or any advice please thanks


thats the same one i`ve got... although i havent seen mine in months, as i`m waiting on my winch bumper been fabricated.... :roll:
Logged

It has been said that, given enough time, a million monkeys bashing at a million typewriters would eventually produce the complete works of Shakespeare. Thanks to the Saxo forums, we now know this to be wrong

No oil leek = No oil left!

Offline 4x4spud

  • Posts: 69
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: fitting a winch
« Reply #18 on: December 09, 2007, 17:55:32 »
Quote from: "Ja1983"
Quote from: "4x4spud"
i have just purchased a champion winch of eblag just like the one in this link http://cgi.ebay.co.uk/Recovery-Winch-12000Lbs-by-Extreme-Terrain_W0QQitemZ290188558768QQihZ019QQcategoryZ36632QQtcZphotoQQcmdZViewItem

i have got a guardian bumper coming when i order it later on tonight

is there anything i need to order or get  in that i will need to install the winch in to a defender with air con and is there any thing to look out for i.e. pitfalls or any advice please thanks


thats the same one i`ve got... although i havent seen mine in months, as i`m waiting on my winch bumper been fabricated.... :roll:





why has it been months as guardian said delivery would be three weks

should i start to worry or have you been a bit lazy and not ordered one for months lol
Logged
fail to prepare.. prepare to fail!



If it dont fit...force it. If ya cant force it...get a bigger hammer. If it breaks...it probably needed replacing anyway.

my rides
90 td5 h/top
tsx 350 honda quad
c125 husqvarna ride on
a builders wheel barrow
the wife
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal