Vehicle & Technical > Range Rover

Advice for taking body off and lifting

<< < (3/3)

v8rangie:
Would this be ok to use as bolts? if its cut to length and a nut welded at the top?

Or would this not be strong ehough?

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=320189512005&ssPageName=STRK:MEWA:IT&ih=011

Bobtail:

--- Quote from: "v8rangie" ---Would this be ok to use as bolts? if its cut to length and a nut welded at the top?

Or would this not be strong ehough?

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=320189512005&ssPageName=STRK:MEWA:IT&ih=011
--- End quote ---


yes mate that would be fine

you could also use nyloc nuts both ends

then theres no need to weld anything

clbarclay:
Or just put a full nut on one end with the threaded bar sticking through a few mm and then flatten the end of the bar against the nut with a hammer.

Navigation

[0] Message Index

[*] Previous page