Vehicle & Technical > Range Rover

Advice for taking body off and lifting

(1/3) > >>

v8rangie:
I need to get the body up off the chassis to repair a front bodymount and while im at it im going to fit 2" spacers.

Just wondered if anyone has any advice before a start.

The fuel tank is already out.

Also what exactly do i need Nut and Bolt wise for the lift.

Wolfie_:
For the lift you need 10 spacers + 4 extended tie bolts and you will also need to get some 10 3/8 unf x 6"(for 2" lift)

v8rangie:
Thanks for your reply.

i have the spacers just need the bolts.

Sorry if i sound simple but what do all those sizes mean in simple terms :)

Wolfie_:
couldnt tell you what size they are in metric but if you take a bolt out and take it to nut and bolt place and ask for ten of them but two inches longer they should be able to match em. Thats what I did and they told me that they were 3/8 unf.

v8rangie:
ok cheers.

B&Q have a wide selection so will just take one up there and measure them up.

Navigation

[0] Message Index

[#] Next page